2. analog
  3. 1312058368

Graham Phantom Supreme?

Has anyone done a comparison between the Supreme and the mkII? Is it worth changing and expending the extra outlay?

The main revisions appear to be the bearing housing and an improved magneglide stabiliser (I think the internal wiring was up to a good standard already on the mkII)

There is a company called AudioMax Ltd (approved contractor?) which can perform upgrades from both Phantom I and Phantom II to the Supreme build.
Any experience of this conversion out there ?
Many thanks... :)
moonglum
syntax's avatar
syntax
2,193 posts
 
P2S is simple
In the Box is a Pin for the spindle and a hole for it in the Headshell from the Armtube. Just flip it over and it is done and correct. Mark the 4 holes for drill and you are on the safe side. With the 9" Standard Arm of course.
in_shore's avatar
in_shore
596 posts
 
Grahams set up jigs ,simplistic child's play using pivoting arm boards. Though mapping out a blank fixed arm board for p2s needs total accuracy while tapping mounting screws.
jtimothya
612 posts
 
Thank you Halcro and Dre_j!
radioheadokplayer
181 posts
 
Anyone know if the phantom I or phantom II can be upgraded to supreme status and for how much?

Thanks

Michael
dre_j
159 posts
 
I shared this procedure I used with Chris Feickert, Michael Fremer, and those attending the event about 5 years ago during one of Michael's seminars at RMAF

Correction, it was during RMAF 2008 instead of 5 years ago.

Dre
More to discover