How a nickel can make a valuable improvement

Spoke to Dan at Eden Audio(by the way, he is a great guy) who is sending me some larger lock nuts to go between the Paw and the plinth so give me for flexibility in getting the table level. Will report back. In any event, things sound great and this was a very worthwhile investment.

I was just going to tell you to ask for those washers. I'll be looking forward to your report.

I use the Edensound threaded Bearpaws on my "suspension-fixed" Pro-ject 6.1 RM with great success. I have the paws screwed up tight to the plinth so they can serve to introduce mass and resonance reduction to the plinth. Additionally I purchased a set of brass washers that had the same outside diameter as the bearclaws. I picked them up at Grainger.com and they are made by Accurate Manufactured Products.
Since they are brass and thick and heavy they match the bearclaws perfectly dimensionally, and add even more mass to the plinth. If you are going to raise any side of the turntable I would recommend underneath the bearclaw not between it and the plinth.

Cinellipro, do you have the parts number for the brass washers from Grainger.com? Thanks.

I purchased the 2 inch OD extra thick brass washer from grainger part number 5ry47 for $6.25 each.