Turntable speed accuracy

Raul try testing the timeline it goes like this - - - - - - -

Dover, that was funny. :-D

The thread "TTWeights table and Timeline accuracy" is mysteriously closed but at least we still have this thread to talk about speed issue. I don't want to stir up the pot and point fingers at certain brands but I still enjoy discussing speed issues in turntable designs.

We are still waiting for Lew to report back on his Timeline experience. :)

_______

I have just fitted a thread drive to replace the rubber belt on the Raven AC-2 (thank you Daniel for the Bavarian thread)........and apart from the increased accuracy in speed constancy over the original rubber.......the actual improvement in sound is astonishing?
The bass appears to have added a half octave in depth, the clarity and dynamics have improved and the sense of excitement and realism on every track is palpable.
Is there more to this than speed consistency?

Incidentally......I had to reset the speed on the Raven motor controller because of the differences in force transfer between the rubber and the thread and I used the KAB Strobe initially to find the 'ball-park' setting.
I then set the 'correct' speed using the Timeline and the adjustments to the controller were quite severe. I'm not talking fine adjustment here.........it required about 7 or 8 presses of the 'faster' button to reach 'correct' speed over that settled by the KAB.This is rather a serious indictment of the KAB which simply cannot be correct?
I don't know if it's just my strobe or whether this is endemic to the functioning of the KAB?
I know that the Timeline is exact as it agrees 100% with the speed indication on my Victor TT-101 DD turntable which is quartz locked.
So the question to those relying on the KAB or other versions of a strobe to set the speed of their turntables........you may wrongly believe your speed is correct.
And to those who state that it doesn't matter......how do you know when you haven't heard?

I'm sure because TTWeights places many ads here on Agon they had a BIG say in why the thread was closed. My own search for a table that has spot on accuracy still continues......

I have just replaced the rubber belt on my Raven AC-2 with the Bavarian thread sent to me by Dertonarm ( thanks Daniel).
The speed consistency is slightly improved with this thread drive but the sound of the turntable has been somewhat transformed.
There appears to be a half octave of added bass together with an increased level of excitement and realism to each and every track and record.
Is there more to the drive method than pure speed accuracy?
When I changed to the thread drive, I needed to adjust the Raven motor controller to correct for the differing characteristics and I used the KAB Strobe to quickly get me to the 'ballpark'.
I then installed the Timeline and was shocked to find how inaccurately the platter was now running? I needed to press the 'UP' button about 7 times to reach the correct speed on both 33.33rpm and 45rpm.
When the speeds were corrected with the Timeline......the KAB Strobe indicated incorrect speeds!?
I know the Timeline is correct as it agrees exactly with the speeds on my Victor TT-101 which are quartz-locked.
Perhaps it is only my KAB Strobe which is faulty?.......but I urge caution for all those relying on strobes to set their speeds?
And for those who claim that speed accuracy does not matter.........how do you know if you haven't heard it? :^)