where to get AudioNote wires

Frogman - what was the teflon tube diameter? I didn't work with teflon much. So I guess the teflon you put just INSIDE the tube, correct? What did you use after that and ouside of the arm base to the pre-amp? Same teflon or something else, would be intersting to know. Thank you

I purchased m Teflon tubing from Michael Percy(.com). He has Teflon tubing as thin as 22 gauge. I think I used 20 gauge. AN wire is very thin so even the 22 gauge will work, the problem is that the thinner the tubing, the more difficult it is to run the wire through it.

I am not sure I understand what you mean by "putting the teflon inside the tube". To be clear: the tube itself is constructed of clear Teflon. The tonearm wires go inside the Teflon tube.

Frogman, Good idea. I have done things like that before, or tried to. In some sense it is trading one problem (threading the fine and fragile wire through a braided shield) for another (threading the fine and fragile wire through teflon tubing). But the latter is probably easier to do.

Audio Note is not Audio Note. Identity relationship is very
deceitful. Ie the objects and the names are different things. Audio Note UK was importer of Audio Note from Japan but annexed the tradename 'Audio Note' for the UK and probable Europe. Kondo san was devasteted by such behaviour
of his UK dealer but was not able to do anything to correct this injustice. Consequently Audio Note wire is not the same as Audio Note wire. Audio Note Japan claims special properties for their silver qua purity and age. I am sure that insulation, thickness, etc. are also different. Anyway the price is certainly different.

Regards,

Lew, what I do is to solder the tinned end of the wire or twisted pairs of wires to the end of a length of thin solid core picture hanging wire which will comfortably slide through the entire length of the teflon tubing, and I pull it through. No danger of damage with reasonable care.