2. analog
  3. 1331674843

Multi Arm Table

I have a Basis Debut but it can only accomodate 1 arm. I change wands on my Graham Phantom for mono play but the loading is also differant so I have to change the phono Preamp input. I want this to be easier so.
I want to set the new table up for my mono cartridge and a cartridge/arm combination to play 45's. I do not want to spend the money I paid for my Basis setup.
I am thinking Clearaudio Innovation Wood Compact and would like some other suggetions.
Thanks
BTW I will be keeping the Basis.
hevac1
nandric's avatar
nandric
4,086 posts
 
Your first (aka cheapest) option is to looks at the 'arm pod' thread. I had the same problem with my Kuzma Stabi Reference and solved the problem by ordering an arm pod/ tonearm combo by the Red (www.red.lt). But you may prefer
some of the ideas from the mentioned thread and build your
own or order one by a manufacturer. The best option among
arm pods is the 'universal kind' with replaceable above plate such that you can use different tonearms. However because of the distance to the spindle you will probable
need 12'' tonearms.

Regards,
dover
2,187 posts
 
The Basis Debut is an excellent turntable, better than some of the alternatives proposed above. The Basis has very precise lockable arm boards that are easy to change over. Why dont you use additional arm boards - you should be able to set up a range of arms with easy changeover.
hevac1 OP
812 posts
 
Manitunc, Thanks for the info I am looking into the table.

Buconero117, I agree.

Stanwal, I want a 2 arm table does the 2001 have 2 arm setup?

Jmcgrogan2, I once had a MicroSeiki BL-91 it was a great table but feel newer tables remove energy and vibration better.

Br3098 & 4musica44107, very interesting table but I am going for option 1.

Nandric, I never thought of that and am looking into it the only issue is the arm as the Basis has a very large foot print.

Dover,I have the clear version that does not have the arm board. I had thought of the black for that reason but went with clear so here I am again looking at tables.

THanks for all your help so far.
kdl
17 posts
 
TW Raven Two can have two arms with a small foot print (18x17). The armboard can have interchangable insert for different tonearms. Raven AC could be better and have four arms capacity but with a much larger foot print and cost much more.
nandric's avatar
nandric
4,086 posts
 
Hevac 1, If your Basis has a 'very large foor print' than
you can use 9'' or 10'' tonearms with the so called 'flat
base' like the Triplanar , the Red, etc. To avoid drilling
3 holes for those you can glue them to your Basis. Assuming
of course that you have > 211mm distance from the spindle
on the left back side .

Regards,
More to discover