General comments on SOTA

Linns are VERY tweeky...Regas can also be, although much less than Linn. VPI's are an easy setup and once set up, you don't ever have to touch them again. Installing a cartridge is always a pain to do on any turntable, but probably you could have your dealer do it for you.

The Cosmos has a design feature different from the other SOTA models that give it a speed control advantage. The motor is mounted on the floating or suspended chassis with the platter. All other SOTA models with suspended chassis have the motor mounted to the base which allows relative motion between platter and motor. My speed control investigations showed me that having the motor seperate from the floating chassis was not a problem as long no external vibrations caused the floating chassis to move. Even when I made the floating chassis move on purpose, I could not hear it in the music except for when I was playing the pure test tone. Of course, having the motor seperate from the floating or suspended chassis can further increase isolation. In my situation, I do not have an issue with external vibration moving the suspended chassis while playing a record. There are other design differences among the various models too, just wanted to mention that one.

Agree with you, Tony. Keeping the motor and the platter from moving relative to one another is a huge advantage of the Cosmos vs the other SOTA models. My old Star Sapphire III was definitely "guilty" of speed irregularity probably related to belt stretching and relaxing. However, I was recently given to understand that the same upgrade can now be had with lesser and older models.

There is a good historical overview of the evolution of the SOTA tables in TAS Issue 210 (Feb. 2011), written by Paul Seydor. Concerning the speed stability issue, he has this to say:

The DC Papst motor, the one real bete noire of the early Sapphires, has long since been replaced by a superior high-grade AC synchronous motor. In older Sapphires the motor was mounted via an undamped metal plate to the plinth; in the new ones, a damped plate with rubber-encased well-nuts acts as a kind of shock absorber. Together these changes result in even greater speed constancy and retrieval of musical detail.

On my early model Sapphire, purchased in 1983 and still going strong without ever having been serviced(!) or upgraded, I've certainly noticed a slight speed instability at times (mainly on piano notes), which I've presumed is mainly due to "hunting" by the servo motor that was used in the early models. I have not found it to be severe enough to be significantly bothersome, though, so I've never seriously considered sending the table in for upgrade. YMMV.

On another note, one thing that never fails to amaze me about the table is that I can pound my fist on the plinth while a record is playing, with moderate force (I've never tried heavy force), without the slightest audible consequences. Try that with a Linn, or pretty much any other table that is in a similar price range! Actually, don't try that with a Linn :-)

Regards,
-- Al

I have been a Sota owners for 25 years (Star, Nova, Cosmos IV) and would never own anything else except, perhaps, a Basis. Why a Basis? Vacuum hold down.
Once you have experienced vacuum hold down with warped/dished record you will never go back to anythings else.

So, in response to the OP, ABSOLUTELY. Go with a Sota and a Cosmos if you can afford it.
My 2 cents anyway.
Sly