VPI Classic Azimuth Seems to Change -- Normal??

Actureus, I never used the VPI AS set-up. Instead, I may have lightly twisted the wire. As stated above, it could be "wire/insulation" memory. Kinda makes sense. At this point, I think there's no twist in the wire.

In response to the Q about how I check azimuth -- I have a tiny bubble level which I place length-wise accross the top of the head shell. In other words, the bubble level is length-wise perpendicular to the front of the head shell, directly over the midpoint of the cartridge. I also check the azimuth in 3 spots: inner, middle and outer tracks.

As I said, the middle and inner tracks are perfect; it's the inner track that torques to one side. I don't remember which way -- clockwise or counter-clockwise.

I sent a message to Mike at VPI. He said that he would check into the anomolie when he gets back from RMAF. He quipped that I was being just a bit OCD, but then added, he would be too. LOL

I'll report back when I hear from Mike.

P.S. -- next TT will be fixed gimbal.

Harry prefers and recommends no anti-skating, and I, after listening for a year with anti-skating engaged as a principle, now also prefer the sound without anti-skating once I gave it a listen. Perhaps the rigidity of the tonearm wire provides enough anti-skating, I'm not sure, but I'm now in Harry's anti anti-skating camp.

Regarding the azimuth, did you try several records to ensure it's indeed the tonearm, not irregularities in the record? And most importantly, can you hear the variations in the azimuth?

Actusreus, yes . . . I tested the azimuth on several records. Same results. The answer to whether I can hear a difference: not really. Doesn't say much for my auditory acuity I suppose. I'm not going to obsess about this, but I am curious what Mike comes back with.

As I said before in other threads, I appreciate the build quality of VPI turntables. However, I think the unstabilized nature of the uni-pivot can present issues.

Bifwynne

As stated I set my azimuth with an angle protractor ($3.00) which gives me a repeatable and measurable point of reference. Like you I also don't use my antiskate on my Classic.

BTW, the hum is "FIXED" I can use any cartridge, Grado's, etc with absolutely no hum, nothing, nadda, nyet and all of that kinda stuff. You gotta email me to find out.

i have the same issue with my classic 1 with my azimuth swifting from one side to the other, and i also figured this by using a small japanese bubble level weighting 0.7 grams made for this purpose. the bubble level is placed on top of the headshell while stylus on a still record.

actually i also addressed this to mike n he has no firm answer to me too how this could happen..