2. analog
  3. 1350008574

Micro Seiki, or TW AC-1

I'm trying to decide between Micro Seiki RX 5000 and TW AC-1.
They are approx. the same price used (about $10K)
Both are belt drive.
Unfortunately, I don't have a first hand experience with either of the tables.
You can see my current set-up in my system page.
The reason, I want to make a change from DD TT to belt drive is just to try a different approach.
Also, I have a feeling, that the bass would be one of the areas, where MS and TW might have an edge over my current DD Technics SP-10 MkII
My endeavor into analog is fairly new, so I'm not sure what my final choice in analog would be, unless I try it in my own system.
What I'm really interested in is the following:
Sonic differences b/w MS, TW and Technics SP-10 MkII
Reliability
Service availability.
maril555
suteetat
435 posts
 
Regarding Timeline, I agree that the step on TW motor control is a bit too big. VPI SDS give a smaller increment in speed adjustment. With TW, it was always either a little too fast or too slow. However, I use my TW without any center weight. I setup the speed with a record on the table and cartridge playing the record and usually just choose the speed that is just a little bit slower than what it should be. I assume that when I take Timeline off, the platter would spin a little faster with less weight. So I imagine that using Timeline, I would never really hit 33.3 or 45 exactly anyhow. On the other hand, once speed is set, I have not really notice significant drift in speed that I can detect with my eyes using Timeline.
sksos1
388 posts
 
People! I will tell you don't buy a Timeline and find out your tables are slow or fast, it will drive you nuts! Once you hear a table that has PERFECT speed control you will then understand what all the fuss is about. I had a TTWeights table and thought it sounded great until I tested it with a Timeline and found it could not keep the correctly speed. I searched and searched and once I found something (and it's irrelevant what I got) I then understood what I was missing. So I repeat, don't buy a Timeline unless you want to start all over again, enjoy what you have.

(Dealer disclaimer)
Ag insider logo xs@2x
tdaudio
201 posts
 
Sksos1, that is an interesting thing to say.

Did you go to a direct drive? Yes or no works for me.

BTW thanks for the dealer disclaimer, not everyone represents themselfs honestly on audiogon.

Terry
sksos1
388 posts
 
Tdaudio - YES

(Dealer disclaimer)
opus88
530 posts
 
Suteetat...I give the speed control switch on my Raven One just a very quick flip up or down as many times as I need to(I've found the push button control of little or no help)while simultaneously checking the rotational speed of the platter with the excellent K-A-B SpeedStrobe disc and Quartz lock strobe light. I've had no real problem setting the platter speed dead on. I then flip the other toggle switch to lock it in. I've also had virtually no or extremely miniscule issues with any platter speed drift over a considerable period of time.
More to discover