2. analog
  3. 1350008574

Micro Seiki, or TW AC-1

I'm trying to decide between Micro Seiki RX 5000 and TW AC-1.
They are approx. the same price used (about $10K)
Both are belt drive.
Unfortunately, I don't have a first hand experience with either of the tables.
You can see my current set-up in my system page.
The reason, I want to make a change from DD TT to belt drive is just to try a different approach.
Also, I have a feeling, that the bass would be one of the areas, where MS and TW might have an edge over my current DD Technics SP-10 MkII
My endeavor into analog is fairly new, so I'm not sure what my final choice in analog would be, unless I try it in my own system.
What I'm really interested in is the following:
Sonic differences b/w MS, TW and Technics SP-10 MkII
Reliability
Service availability.
maril555
sksos1
387 posts
 
People! I will tell you don't buy a Timeline and find out your tables are slow or fast, it will drive you nuts! Once you hear a table that has PERFECT speed control you will then understand what all the fuss is about. I had a TTWeights table and thought it sounded great until I tested it with a Timeline and found it could not keep the correctly speed. I searched and searched and once I found something (and it's irrelevant what I got) I then understood what I was missing. So I repeat, don't buy a Timeline unless you want to start all over again, enjoy what you have.

(Dealer disclaimer)
Ag insider logo xs@2x
tdaudio
201 posts
 
Sksos1, that is an interesting thing to say.

Did you go to a direct drive? Yes or no works for me.

BTW thanks for the dealer disclaimer, not everyone represents themselfs honestly on audiogon.

Terry
sksos1
387 posts
 
Tdaudio - YES

(Dealer disclaimer)
opus88
530 posts
 
Suteetat...I give the speed control switch on my Raven One just a very quick flip up or down as many times as I need to(I've found the push button control of little or no help)while simultaneously checking the rotational speed of the platter with the excellent K-A-B SpeedStrobe disc and Quartz lock strobe light. I've had no real problem setting the platter speed dead on. I then flip the other toggle switch to lock it in. I've also had virtually no or extremely miniscule issues with any platter speed drift over a considerable period of time.
dover
2,243 posts
 
Solong your experiences with the Raven are flabbergasting. My Final Audio Parthenon, built in the 70's, using an AC motor/20kg platter, has infinite control of speed at both 33 & 45, and the amount of torque applied to the motor is fully adjustable to optimise speed stability and minimise motor vibration.
The real killer though is that I have a Thorens TD126mk2 that I use for 78's also built in the 70's - this has a wein bridge oscillator speed control & rubber belt as standard and it can hold speed accurately, even when putting the 1.8kg record stabiliser from the Final Audio on there was no speed adjustment required and the speed holds.
It just makes you wonder whether the advent of digital controllers in modern motor technology is simply not good enough for audio.
More to discover