Dedicated AC lines???

If I were to wire a dedicated line I would use Aluminum flex
(indoors) or if the line had to run outside EMT.( Or weather-tight flex. Ask your electrician.) Try to avoid using romex if possible. Use solid wire THHN 12ga.(20amp)/10ga. (30amp current capacity). Try to have as few
possible splices (when using a wire nut to join two wires together, lay wire side by side then twist on wire nut) Use
a seperate ground wire the entire length of run. Be sure all
metal boxes/conduits are properly grounded. Use high quality
electrical outlet. As far as audio grade circuit breakers/
wire, I'm not aware. Look into VansEvers power conditioners.
(www.vansevers.com) Hire an experienced, knowledgable electrician (hopefully one that's an audiophile too!). Make sure you explain and they understand what you want done. I hope this helps. Billk

I highly recommend to brows among Albertporter participated threads and you'll find his comments very helpful.

JPS has a special and expensive inwall cable for this. Putting things on the same phase with ceramic fuses will give you smooth and liquid sound.

Kotta, are you recommending the use of aluminum wire for wiring a house or circuit ??? As far as i know, that is against the law now, or at least it is in Illinois. Someone needs to clarify this. "HEEEEEEEY Glen"......

If you are recommending aluminum wire, what do you see as the benefits to doing such as compared to equivalent copper wiring ? Sean
>