2. analog
  3. 1355758964

balanced output VPI

I just bought a RCM Prelude Sensor phono pre. This phono pre has the option for balanced input over RCA. I own a VPI scout wich means I can use a normal RCA cable. Can I just flip the dip switch on teh back of my RCM to have the benfit of balanced input or are things more complicated then that?

The interlink I use is a special RCA RCA phono cable with an extra clamps for ground signal.
mordante
brf
1,715 posts
 
I looked up your preamp and Riffer is correct, you will need to construct a special RCA to RCA cable. This is clearly explained with a explicit drawing in the manual.
mordante OP
511 posts
 
Thank you all for the advice. If I use a special RCA to RCA cable. I would need to modify the junction box. Maybe I will do this inthe future.

For now I will just enjoy the music. My girlfriend would not be amused if right now I would start about buing cables. But maybe in the future I will keep an eye open for the Nordost Blue heaven leif RCA-RCA phono cable.
riffer
362 posts
 
To be honest though, I would probably just try it with a regular interconnect and see if it shows any promise.
riffer
362 posts
 
No, you won't have to modify the box. Again, it's all in the manual.
mordante OP
511 posts
 
@Riffer,

When I look at the manual:

http://www.vpiindustries.com/manuals/vpi-scout.pdf

I find nothing about how the juctions box is wired.
More to discover