Buying a used cartridge...tell us your tale.

Very risky may be ok in rare cases.

I bought a Benz LP that was described by the seller as "nearly new, not even fully broken in." I was skeptical but it turned out to be 100% true. From the other side of the table, I can vouch for the several used cartridges I have sold. They were each accurately described. So I agree that there are risks, probably more so than with other components, but with a reputable seller I would not hesitate to buy used again.

The other issue that seems to be overlooked is the aging of the cartridge suspension. These components may even wear out prior to the stylus and are IME very hard to determine by a general eyeball inspection.

The question then becomes as to whether the used cartridge is performing up to spec and what the overall loss of information and distortion is due to suspension age?

Only tried it once (other than inexpensive MM's costing $200 or less). It was my first venture into LOMC's. The entry price seemed steep so I decided to risk buying used (understanding that there was a risk).

Got a $2K cartridge for $900. On arrival, I noticed that the cantilever was angled well off center and the stylus was twisted a few degrees off vertical.

It sounded great, but it was my first LOMC, so what did I know? I was a newbie and had neither the equipment nor the ears to know better.

With the experience and gear I have now, I wouldn't try it again unless I knew and trusted the seller.

Ebm,
Buying a used AT-ML170 was the best analog move I've ever done.
Second best, buying a used DV 10xGoldL.
Two reference carts that will blow away carts costing $$$$$ more.
Risky yes....but so stupid good!!!!!!!