Which headshell to use?


Hello. I am a new member to Audiogon and am seeking some adivce. I have a vintage system consisting of a Pioneer SX1980 receiver, Teac X2000 reel to reel, Klipsch Belle's and most recently added a Pioneer Series20 Model PLC-590 turntable. It is set up with the Pioneer PA1000 tonearm, but has an aftermarket headshell by Audioquest. Ive installed an Audio Technica 440ML cartridge that I was previously using on my Empire 698. Given that you guys know just about everything with regard to turntable setup and I know just enough to get myself in trouble, could someone please reccommend an appropriate headshell. Any feedback will be greatly appreciated. Looking forward to becoming part of your community. Rick
35off
Thanks Mofimadness for your reply. Ill take a look at the Orsonic. I know there is a whole "science" to turntable set up and what works well with what. How much impact does the headshell really have or is it mostly a carrier of the cartridge. Obviously next comes the correct cartridge match which I know is a whole nother story. Any suggestions in that arena will be greatly appreciated as well. Thanks again for your input. RM
I also have lightweigh (silver) Orsonic headshell for my Denon DL-107 MM and it was ok.

Later i tried Technics EPA-100 with stock headshell with my Zyx Airy 3 MC and it was ok too. But when i bought heavier Zyx Live 18 headshell for ZyX Airy i was blown away buy the difference in performance, even my girlfriend noticed that. So if the weight of Zyx Live 18 is ok for your cartridge/arm it can be one of the best shell (but it's not cheap option).

The budged option is Audiotechnica Technicard shells, the esiest shell to mount cartridges, pretty good one and must be in collection.

As for audiocraft i'm sure it must be good (i want to try one). I use heavy utracraft shell (by audiocraft) on my Thomas Schick "12 tonearm with low compliance Argent MC500HS cartridge and i like it. Design of this black ultracraft is great.

I can't say much about wooden headshells (like yamamoto sound craft), but a friend of mine has their ebony wood shell for his grado cartridge. Unfortunately this shell cracked after all, not sure why exactly, but that's not good imho (wood is very sensitive to temperature etc). Anyway people love it for DL103 on Schick Arm. There're also titanium headshells in yamamoto soundcraft line...
kk
...could someone please reccommend an appropriate headshell.

I don't believe with a headshell there is a standard of appropriateness that is independent of the overall sound it plays a part in making. That is to say, the appropriate headshell is the one that, along with your cart and tonearm, produces your preferred sound. A consequence of this is that, absent experience with a particular combination, no one can predict which one will work best. Thus, a headshell made of other-worldly materials and with an other-worldly price may not be better for you than the 'cheap' stamped one.

Unfortunately, this means that, like Mofimadness (and myself), you'll end up with a box full of headshells.

Having said all that, here are some considerations to keep in mind when shopping:

1. overhang adjustability: some headshells (e.g., AT mg-10) have pre-set holes and are not adjustable, while others have pre-set holes but are adjustable via a set screw (AT ls-12); but most common are the ones with slots.

2. weight: be sure that your arm can balance the headshell + cart combo

Being close to the source (the cart), I believe headshells are very important. I just experienced a case in point. I recently mounted a victor z1 mm cart onto a cool looking vintage victor headshell made around the same time as the cart. I reasoned that victor wouldn't make a headshell that didn't match well with one of their signature carts. I was wrong: I couldn't get the combo to sound nearly as good as the first combination I tried (z1 with AT ls-12 headshell). Tonight, I tried a 3rd combo: z1 + lp gear zupreme hs): again, significantly different from the first two.

Finally, don't forget the importance of headshell leads. Personally, I prefer and use silver ones (with kondo and ikeda and, soon, zyx wire). Since you're just starting out, I recommend buying some good silver wire and clips and getting someone to make you leads (unless you are good at soldering and can make them yourself). That way, (assuming you would follow the trajectory of the typical neurotic audiophile) you'll save yourself from amassing a graveyard of leads (like I have) that weren't good enough.
Thanks to all for your input so far. Banquo363 it's funny you mention leads because I've read about the importance of high quality connectors. Totally makes sense. In essence they start the chain of events as signal moves through your system. I've been collecting vintage gear for quite some time and have put together some high quality gear for its time. Now it's at a point to attend to the details to get as much out of it as possible. I'm really looking forward to tapping into the brain trust available with this community.