For VPI Unipivot Owners, do you use antiskating?

I have the VPI anti-skate device, but I do not use it. I find the tonearm loop twist works just fine for my applications.

I have a JMW-12. It doesn't have anti-skate and I do not attempt to put any torque into the leads to create anti-skate.

I have tried with and without, and without is better. Putting pressure on one side of the groove, is like damping the cartridge. Not for me.

FWIW, I have a Wilson Benesch (also a Unipivot) and use anti-skate. My setting is calibrated using the HIFI News test record--there are 300hz test tracks with increasing amounts of gain. These induce distortion and you can hear if it favors one channel or the other. I find this to be a really effective way to properly set anti-skate, and the truest measure of stylus contact evenly against both sides of the groove.

Correct anti-skating adjustment is essential to any type of tonearm used.
Get yourself a one sided record which is blank with no grooves on one side. I use a Donna Summer Disco Casablanca label that you can get on Ebay for less than ten bucks.
When you lower the arm on the records blank side when playing it should stay stationary if correct. If it moves towards the out or inner groove you can then adjust until there is no movement at all.
When anti-skating is correct it will amaze you what a difference it makes.
You will find records quieter and more focused!