2. analog
  3. 1432420024

Phono stage w/automatic Load-Impedanance.

Yes, automatic load impedance! The WLM PHONATA offers very high dynamics as a result of its very special design (see below)

A few years ago i purchased a slightly used demo unit from Australia. It was reasonable priced (mint- condition) WLM PHONATA reference MM/MC phono stage from respected WLM Acoustic brand (made in Europe). I use it since that day in my system.

a picture of the wlm phonata linked below:
http://audioaddiction.net.au/wp-content/uploads/2012/05/Phonata_3XL.jpg
http://audioaddiction.net.au/wp-content/uploads/2012/05/Phonata_4XL.jpg

When i bought mine demo it was newly released and totally different for previous WLM model (which was a smaller tube stage). The reference WLM Photana is not a tube stage. I'm not sure what's happened after, but probably it was not widely distributed, maybe they made first run and stop the production of this nice unit. They never updates their own website with info about this new unit. It's impossibe to find any reviews online and i assumed there are not so many users.

I wonder if anyone on AudioGon aware of this ice nproduct. I'm sure most of you familiar with amazing range of WLM speakers and different Tube Amps.

But do you know anything about WLM Photana Referense Phono Stage MM/MC ? It has some interesting features such as AUTOMATIC LOAD IMPEDANCE and 2 RIAA CURVES. It comprises pinnacle circuitry and design features that have never been realized before.

The PHONATA works with two-stage amplification:

• An inductive voltage amplification stage (for MC cartridges) using high
performance professional audio step-up transformers.

• A solid state current amplification stage, using specific MOS-FET transistors with tube-typical harmonic distortion characteristics.

The PHONATA offers utterly precise RIAA equalization:

• RIAA equalization is implemented across two amplification stages (within current amplification), providing a frequency expansion from 10Hz to 50kHz (Subsonic cut below 10Hz). Selected components (1% tolerance) are used.

• RIAA equalization can be selected from two positions with a switch at the back of the unit:

- Position “high” for records produced before 1965 or to improve the performance of somewhat “darker” sounding cartridges at higher frequencies. This position provides +3dB equalization as from 5kHz and +6dB as from 10kHz.

- Position “low” for all other records The PHONATA offers automatic adjustment of Load-Impedance:

• You don’t have to adjust the load-Impedance of your cartridge (plus the interconnect-cable between cartridge and Phono-Preamplifier). It goes automatically thanks to one ingenious piece of circuitry.

• You don’t have to adjust the source voltage of your cartridge as well.

• There are no micro-switches or any other mechanical contacts in the signal-path.

Technical Data:

MC-Input Impedance Range: < 100 Ohm to 50kOhm
MM-Input Capacity: 100pF
THD (Total Harmonic Distortion) @ 1kHz: 0.01%
SNR (Signal to Noise Ratio) MC: >72dB
SNR (Signal to Noise Ratio) MM: >85dB
Max. Input Voltage for MC-cartridges (theoretical value): 1200mV @ <1% THD
High Performance, Professional Type Step-Up Transformers.
128x128chakster
fleib
1,124 posts
 
Atmosphere,
You should have quit while you were behind. I've read Hagerman's article and I could point out some erroneous assumptions, but they pertain mostly to MM's. If you're interested you should read the VE thread, Cartridge Loading Explained.
But we're talking MC's here and one HOMC with a solid state phono stage, and I still fail to see where your comments pertain. I know about the tank circuit on the output. I'm also familiar with high frequency overload or oscillation and the possible need to load down the preamp shunt resistance.

Apparently you think this is the only reason to load down a cartridge. If so, you're wrong. I've already explained that wide open is not always better. Maybe it is in your preamp, I wouldn't know, but we're not talking about your preamp.

If you have something to say about current amplification on the front end, that might be helpful.
Regards,
stringreen's avatar
stringreen
6,494 posts
 
Chakster....Ayre
fleib
1,124 posts
 
If you go to WLM Acoustics they only show the tube phono available in 3 different configurations with SUT for MC gain. Specs to be announced.
http://www.wlm-acoustics.com/

Fremer reviewed the BMC MCCI phono stage on 8/13. This uses current amplification on the MC front end. The unit looks remarkably similar to Chakster's link for the solid state Phonata.
http://www.stereophile.com/content/bmc-phono-mcci-phono-preamplifier

Results seem different from what Chakster said, especially concerning cart impedance, and it's unclear if these are the same.

A couple of guys who post on the MM/MI thread own Atma-Sphere MP1 preamp. They each have high end systems in the extreme and think highly of the MP1 phono section.
Our disagreement is mostly one of appropriateness and in no way is a reflection on the product.
http://www.atma-sphere.com/Products/#MP-1
chakster's avatar
chakster OP
6,144 posts
 
Yes, no updates on WLM website for a very long time :(

no reviews on new Phonata Reference which was the neхt model and released after their tube phono stage.

This is a google doc link to MANUAL of Phonata Reference:
https://drive.google.com/file/d/0B7SnhzDV__cCc2lfQ0NYRnVuRlE/view?usp=sharing (anyone with this link can download .pdf file)
atmasphere's avatar
atmasphere
12,003 posts
 
Apparently you think this is the only reason to load down a cartridge. If so, you're wrong. I've already explained that wide open is not always better. Maybe it is in your preamp, I wouldn't know, but we're not talking about your preamp.

I am not talking about MM, where achieving the critical damping value is important for best performance.

I am talking about the fact that if you hear tonality change with a LOMC seemingly due to loading, its on account of the behaviour of the preamp and not the signal from the cartridge.

I had a conversation with Jonathan Carr at the recent Munich show. He mentioned the same phenomena that I did in a prior post- that when you load a cartridge with a lower impedance, you are asking it to do more work. Since the cartridge is a magnetic transducer, the lower the impedance of the load the more work is being asked of the cartridge. For this reason he was very interested in developing a phono stage that had a high impedance input so as to minimize the work that the cartridge is doing. This would leave it more free to follow the modulations in the groove.

Re. current gain inputs: due to their inherently low input impedance, the mechanical loading issue as pertains to the above paragraph is likely not optimal, however you certainly would not have to worry about what the load impedance actually is since the electricalresonance would be well-damped.
More to discover