Well Tempered bearing old vs new

Bill_k ...

I've owned an original WWTT since it was new in the 1980's. The belt needs to be changed out about every two years ... even if you don't think it needs to be changed. Over time the speed accuracy diminishes. When you change out the old belt for the new one, you can definitely hear the difference in speed, dynamics and tonal balance.

I just replaced my belt about two months ago. I opted for a custom belt built by

www.originlive.com

They are located in the UK. Its an excellent company, reliable ... and their belt actually transformed my TT. You can imagine how many belts I've been through over the past thirty-some years ... and there has been nothing that compares with the originlive belt. Not even close. Highly recommended ... and the good news is, they are just about the same price as an ordinary replacement belt. Hope this helps ...

Happy listening ...

Oregonpapa - Good lead on the replacement belt available from OL. They are a first class operation and very reputable. I run their top of the line Enterprise-C tonearm and it is superb.

I apologize for confirming that the old and new bearings both have five contact points, as that may have apparently changed in the newer designs as pointed out by Mr-m.

As a test, I switched the black platter and larger spindle from my WTT with the smaller spindle and acrylic platter from the WTRP, leaving the bearings in their respective plinths. The black platter and larger spindle ride properly on the WTRP bearing. The acrylic platter and WTRP spindle ride better on the WTT - that might be because the motor is moved back pulling the belt with greater tension. Such a puzzle.

On the advice of Art Dudley, I spit an older stretched WT belt, took about 1.25" out of it, and glued the ends together with Crazy Glue. NOS WT belts are neoprene, not rubber. Worked great.

I'm planning to get the WT thread belt pulley for the WTT.

Gvoth ...

Listen to the table for a few months ... then get the originlive custom belt. You will be more than happy you did.