Tvad, just an FYI, but while using the DEQ2496, you should definitely try using it with it's stock power cord first. That eq was one of only 2 pieces of gear I've ever heard that didn't sound better with an aftermarket PC. Also, be aware of it's high output level with the back-panel switch set to +22 db. It may very well cause overload distortion in whatever you feed it into. Unfortunately, I found the lower-output setting to sound really inferior.
Bargain interconnects to tame treble & boost bass?
Here's the system:
Sony DVP-NS755V
Audioquest Alpha Snake
Bryston B60R
Kimber 4TC / 8TC bi-wire
Triangle Heliade ES
Problem: Sound tilted way toward top-end.
I've done about as much as I can in speaker placement and room adjustments, but the system still sounds too bright and too bass-shy. The treble is also a problem when running the television sound (digital cable) through the system, so, while I recognize that the DVD / CD player is not the best, I don't think it is the primary culprit. (I do plan to upgrade the CD player eventually.)
I sort of suspect that the ultimate solution would be either to replace the amp with a tube amp or to replace the speakers. But both are recent purchases, so I would like to see if better interconnects might make a difference.
Are there interconnects for $200 or less (for 1m), new or used, that would help solve my system's problems? I am open to any other suggestions you might have. Thanks.
Sony DVP-NS755V
Audioquest Alpha Snake
Bryston B60R
Kimber 4TC / 8TC bi-wire
Triangle Heliade ES
Problem: Sound tilted way toward top-end.
I've done about as much as I can in speaker placement and room adjustments, but the system still sounds too bright and too bass-shy. The treble is also a problem when running the television sound (digital cable) through the system, so, while I recognize that the DVD / CD player is not the best, I don't think it is the primary culprit. (I do plan to upgrade the CD player eventually.)
I sort of suspect that the ultimate solution would be either to replace the amp with a tube amp or to replace the speakers. But both are recent purchases, so I would like to see if better interconnects might make a difference.
Are there interconnects for $200 or less (for 1m), new or used, that would help solve my system's problems? I am open to any other suggestions you might have. Thanks.
- ...
- 69 posts total
- 69 posts total