Telling Left from Right on unlabeled RCA cables


The gray RCA phone plugs coming out of the back of my turntable have no color labeling and no L or R on them. On one the "head" is about 3/8" longer. So which one is the left channel and which is the right channel to plug into the back of my amplifier?

Thank you!
williams5
i have a suggestion.

select an lp from your collection which has a passage coming out of the left or right speaker.

interface the longer connector with the left channel.
listen. if channels are correct, put a peace of masking tape labeled "left" onto the connector. if channels are reversed, place tape with "right" on the longer connector.
Get the Sterophile Test CD which has a speaker channel orientation track. It will take you 10 seconds to fugure it.
Get the Sterophile Test CD which has a speaker channel orientation track. It will take you 10 seconds to fugure it.

I would strongly discourage attempting to play a CD on your turntable. Unless I've completely lost touch with the advancements in technology, it will not likely yield the results you need to determine which cable is which channel.

I'm not sure how proficient you are with adjustments to your turntable, but you could potentially determine which connection on the tonearm-cartridge interface is for the right channel, pull that connection (carefully) with a pair of tweezers, and play an LP to determine which is the left. Once you figure that out, it should be pretty easy to figure out which one is the right.

Marco
Play some orchestral music, and look for the violins on the left and the double basses on the right. Almost foolproof.
I would just do a continuity check (ie with a multi-meter) from one of the headshell leads to the RCA. The red headshell lead is the right channel +, green is right channel -. Pick either one, and test to the RCA + or - accordingly. This takes 15 seconds to do.