Home made cable lifters.

Interesting challenge Herman. I`ll do it. I`ll report back in a week or so.

Well, we sell these but look - with a bit of time on your part, it wouldn't be too hard to make these yourself. These are visually appealing and, lifting the cables off the floor makes a meaningful improvement to the playback.

Link HERE

Hope this helps.

Kind Regards,
Robert
RSAD

Thanks for your input Robert and I`d like to wish all a`gon members and their families a safe and happy Thanksgiving.

Use an old broom / mop wood handle and cut proper length pieces for teepee construction. Chances are up to this point you can set them up without leaving home or buying anything!!!!!!!!
You can cut slots in the outside part of the teepee and instead of using a rubber band for cable suspension (they age and sag, if you want to limit floor vibration ) get proper sized "O" rings and set them between each post.
If you want to finish it properly get left over paint from your walls or get a matching color for furniture / carpet to help WAF.

If you still want to improve the looks you can saw the bottom of poles to flat seat on the surface.
It all depends on how much detail and finished look you want.

You can even "spike 'em" if you like.

Plenty of options. Happy tweaking and listening!!!

Luis

Use plastic rebar chairs! All colors and sizes available. These are the devices that hold up the steel reinforcement "rebar" on concrete slabs. Go to any development in progress and ask a foreman for a few. Tell him you are pouring a small slab to avoid any funny looks. You might also find them in hardware stores, but in large quantities. Do a search for "concrete chairs". Here is one manufacturer.

http://www.paragonproducts-ia.com/Rebar_Supports.html

Steve