Home made cable lifters.

I can understand lifting a cable from a concrete slab (which is what I have). After all, there is steel reinforcement underneath. A solid chunk of steel has exponentially more effect on the impedance properties of a cable that "artificial fibers". I'm not even going to comment about the artificial fibers vs natural fibers debate. Good grief. I made this recommendation because these lifters look a lot more "professional" with expensive cables than wooden teepes or styro cups. Just a suggestion, nothing more.

If you have a gas high temperature kiln, shape or mold the shape you need and apply a salt glaze and fire. If not forget about anything other than high fire ceramics.

Wood, glass, plastic, and even paper in my experience do not do the job. Even unglazed ceramics like bricks are no good.

I have found that discarded ceramic electrical insulators such as you might find outside your utility company can be very good, although they might not have WAF.

We do agree that lifting cables off the floor(especially carpets) make a(good) difference. I can't lift my cables the 8-inch recommendation of Mapleshade(I'de also note that Mapleshade recommends power cable lifting, also.) I also appreciate the two manufacturers responses here. Tgb, can you purchase what you suggest, without doing anything to it(for us nimrods).

I have all wood planked floors with Pine slat walls, it is a wood framed house very rustic.
The speaker wires are generic west penn copper electric wire awg 14 gage pair teflon coated about 10 ' each channel.

Is it as critical to get it up off the floor when its a wood plank floor with forced water radient heat tubes underneath. I also have metal base board heating foils about 6 inches up the wall. If I run it under the couch there are the springs .

What about ceramic wall hooks like you would use in the Bathroom 8" high above the base board heaters but hanging with epoxy from the wall ? Or should I leave them well spread on the floor away from the base board heaters and under the couch. My system is pictured in budget under the title Modest System.

Thanks all you tweakers

best regards

Groovey

Listening to Stevie Wonder - Fulfillingness' First Finale
Motown 2-47075 Spanish Pressing

Mmakshak, Elusive Disc and others have utilities insulators for sale. They look like what you see on most telephone and electric poles. All I can say is that I have some of what RightWay Audio used to sell and they sound better than those I found outside my local utility in the discard pile.

I used to have access to a gas high fire kiln and have found pots that I made then to be good under cables, but my wife objects to their use on the floor.

Groovey, I have wood plank floors and have no radient heat. I find it imperative to raise the cables. I don't know about the ceramic hooks. All I can suggest is to try them. The cables would still be very close to the wall surface, however.