Synergistic New Tesla Line...Any comments?

Tbg, thanks for the advise, but unfortunately this is not
an option for my rack since there are support posts in the
way. So, did the increase in sound stage come at the cost
of increased edge or brightness?

Ozzie, does SR offer these jumper plugs, and are they
quantum tunneled?

Also, I would like to know if any of you have achieved
a relaxation effect using the migs.

Scottmac62, SR does have the QLS-6 and 9, which are quantum tunneled. These are quite long and come only with a short pigtail ac lead to the cable male plug. You will probably want a T2 to connect to the QLS. Remember that even the QLS-6 is quite long.

You also could turn the PowerCell upside down so the MPCs to project upwards. I wonder why the outlets are put in that way.

I don't know exactly what you mean about relaxation effect. Speed and transparency improves. You may want to experiment with whether you prefer the ambient or pin-point setting. I still have not resolved which I prefer under the amp.

Scottmac62 , No the jumpers were bought at a hardware store.

Hi all,

Is it better to plug in a Galileo MPC to a QLS-9 or directly to the powercell SE?

Right now I have the Galileo (dual leads) plugged into a QLS-9. The two Galileo MPC leads are powering the powercell and precision ref cord. The QLS-9 has a T2 power cord and it's plugged into the powercell se.

I'm just wondering if there will be a major improvement if I moved the Galileo MPC directly into the SE.

Thanks for the advise Tbg. Unfortunately, if I place the
Powercell se upside down then plug for the Precision pc
would be too far away. I also have a qls 6 feed by a T3 UHC,and Tesla plex but I am using this for my Niam gear. The Naim XS integrated amp and also a Teddy cap do not sound right with the Powercell. The prat suffers and there is hardness imparted to the sound.

So, what I am trying is the use of three racket balls and ankle weights on top of the powercell. Kind of a diy gingko isolation method. So, far i am liking the effect. I am getting better front to back layering and
the highs are more relaxed with more texture.

My experience with metal cones has always been an increase
in transparency in addition to an increase in brightness.