Synergistic New Tesla Line...Any comments?

Milimetr, the cable leads to the speaker binding posts are 36" long and the connections are about 4" off the floor. My stands are 28" tall and the connections on my LSA1 Statements are at the bottom of the speakers. I don't think you or I will have any problem with the Universal Speaker Cell wires.

The Cells also come with a very long connection wire allowing one Galileo MPC to be used to both speakers. The Apex speaker wire's charger connection is at the amp end. The Apex speaker wires are thick and stiff so they might twist the Universal Cells around, but you can shape them to not have them do so.

I strongly recommend both the Galileo Universal Speaker Cells as well as the Galileo Universal Interconnect Cells.

I believe that the tails are available in 3 standard length.
A 16 inch pairs come standard with speaker cells but you can get longer lengths. I definitely think that they are worthwhile addition. I did get extension leads for MPC for speaker cells so a Galileo MPC with dual leads can reach both speaker cells.
Yes, you need one MPC for speaker cables and one for speaker cells. The blue LED on speaker cells are significantly brighter but you can rotate them and point them in different direction unlike the LED on cables.

Suteetat, maybe available in 3 standard lengths, but I didn't specify and got 36 inchers. The extension leads for the MPS on the Speaker Cells is standard.

Thank you guys for answers.

Does anybody used Cells (speaker or interconnect) with cables other than SR? What results?

Deos cells worth consideration regardless of cable barand used?

Cable Company told me about 3 choices for tail length. I runs 2 pair of 16 inches tails for biwiring.
One caution as it has been mention, Speaker Cells are quite light and with Apex speaker cables, they may not sit so easily on the floor. Also, my speaker terminals are about 12 inches off the floor so I thought that 16 inches tail would be enough. I was wrong. The tail are not very stiff but not exactly flexible either and 2 pairs of them with Apex speaker cables at the other end, I could not really find a way to have the speaker cells sit on the floor without putting extra weight on them. In the end, I have to get a 2 inches block to put under speaker cells so all spikes on the speaker cells can have solid contact with the floor.