Why are there no high end cheater plugs?


Yes, I know there are safety reasons for not using such ground lifting devices; but as many audio magazines have suggested, the benefits from lifting all grounds except the preamp are quite substantial. But the 79 cent cheater plug covers much of the improvement. I made some cheater plugs using silver wire but Eagle plugs. They are better than the grey guys. Why does no one make a quality plug? I understand that at one time Siltech did make such a plug.

Please no "educate" me of the safety reasons for not using cheater plugs. I think the success that our immediate ancestors had in surviving two plug ac, suggest that chassis shorts must be quite rare.
tbg
Yep, that would indeed a problem.

Maybe Stealth would deliver them new with the ground floated? Then again, some lawyer somewhere would sue them for delivering an unsafe product.

Funny thing is, my home was built in the 1950's and until I redid my electrical, there were no ground pin type sockets to be found. We did fine with this design for decades and in my opinion the stereo sounds better with EVERYTHING floated.

I know this flies in the face of tradition, but that's exactly how my system is wired, even the preamp and phono are floated. I think the CD player may be grounded but I typically unplug it once we begin listening to music.
Buy a high quality 3 prong plug but don't connect the ground lead!(for safety reasons I discourage this)
Well if your using a cable that has the simple WBT type casing you just open the casing up with a screwdriver, and disconnect the ground in the power cable itself.. I have done this in the past, then put it back later if needed.. however if you need to cut off heatshrink or something to get in there, well it would need to be replaced, or left off till you go further with it. I would never use a cheater plug on a good cable, simply cause of effecting the already good connection and plug.. Not for saftey reasons though. I mean hacksawing off the ground, leave it, and just cut off any heat shrink keeping you from disconnecting the cable the proper way internally.
Undertow, as I told Porter, one cannot get inside the plugs on Stealth Dream cables. They are glued on.