2. cables
  3. 1181919608

Why are there no high end cheater plugs?

Yes, I know there are safety reasons for not using such ground lifting devices; but as many audio magazines have suggested, the benefits from lifting all grounds except the preamp are quite substantial. But the 79 cent cheater plug covers much of the improvement. I made some cheater plugs using silver wire but Eagle plugs. They are better than the grey guys. Why does no one make a quality plug? I understand that at one time Siltech did make such a plug.

Please no "educate" me of the safety reasons for not using cheater plugs. I think the success that our immediate ancestors had in surviving two plug ac, suggest that chassis shorts must be quite rare.
tbg
tbg OP
5,263 posts
 
Undertow, as I told Porter, one cannot get inside the plugs on Stealth Dream cables. They are glued on.
rx8man's avatar
rx8man
1,482 posts
 
Albert,

I'm with you on this one. I recently installed a 10-2 dedicated line to my second room upstairs.

Rather than try to figure out which component IEC to dismantle, plug to tear apart or cheater,
I figured how simple it was to drop the ground wire inside the dedicated duplex box which my Hydra is plugged.

Everything in my rig is floated and it sounds better than it ever has.

I live in a "slightly AC polluted" condo complex and God only knows the miserable wiring installation (Federal Pacific boxes) they used during construction (late 70s) wasn't anywhere near top notch (cheap bastards)
tbg OP
5,263 posts
 
Guys, I tried floating everything. That was the easiest thing to do and some have long recommended it. But I found the grounded preamp superior, and you do not have to worry about statistic charge buildup especially in the winter. I must say, however, that with all my outlets' grounds tied together even thought the outlet box was not grounded, means that the energy in their individual grounds commingles. I never really tried everything ungrounded with no ties between anything else.

I appreciate everyone seeking to resolve my problem, but I guess the answer seems to be that there are no high end cheater plugs. Even Purist doesn't make them.
jafox
1,457 posts
 
Why not open each component and desolder the ground wire from the IEC connector?
tbg OP
5,263 posts
 
Jafox, I did look into the Accustic Arts dac and Drive One to see about that. It would be easy on the transport and very hard to get to on the dac.

Meanwhile, I continue to use the cheaters I made. There is another way also. The Dream Powers do not have a circuit ground. I could sell the Digitals and buy the Powers.
More to discover