A hard look at the effect of cables


Hey guys
A fellow EE audionut directed me to these articles and I thought some of you might be very interested to read them too. Two arguably qualified engineers went through the pains to take high quality measurements of the effect of cables and their interation with a complex electrical load, such as a full range loudspeaker, and with a complex signal, such as music. The link below is to the final installment but be sure to also read parts 4 and 5 very carefully. Part 5's Figures 6.8 and 6.9 are really amazing. I had never seen such measurements and they definitely seem to correlate with what we hear. The cables lengths are longer than normal but I think the point is well made. Hope you enjoy this read as much as I did.

http://www.planetanalog.com/showArticle.jhtml?articleID=202102592

Arthur
aball
"Bring back the stereo console and have everything hard wired and stop all this craziness!".
Actually I think it's going in opposite direction. Wire has acquired such magical properties in recent years that soon we will be able to eliminate speakers, amps, sources, etc. and the magical cables will make music all by themselves.
"Wire has acquired such magical properties in recent years that soon we will be able to eliminate speakers, amps, sources, etc. and the magical cables will make music all by themselves."

http://socrates.berkeley.edu/~argon/nanoradio/radio.html

I guess this is why Spectral had MIT design some cables for them. At least MIT demonstrates an appreciation of some of the basic interface problems when they provide for impedance matching? Not magic, just solid engineering features.
Knownothing, not to criticize but the jury is "definitely" 'not' out on the hi fi benefits of using a sub, and hasn't been for a very, very long time. JBL was making dedicated subs(350 & 460 in the early '80's if memory serves) that dramatically improved the mid & upper range clarity and dynamics for high quality full range speakers as well as enriching the bass response & quality. The level of quality available today is jaw dropping as is the ease of set up provided by the sophisticated units from Revel for example.
Arthur, thanks for providing the great post and link. If only more Audiogoners could only follow your example in brevity, clarity, usefullness and supporting documentation.