DIY solid gold interconnects?

Gold is not a very good conductor at all. RCAs and tube pins, etc are plated very thinly(as you observed) simply because gold does not oxidize. Silver's conductivity is not affected when it tarnishes, but it looks bad, so most people that sell silver connectors on their interconnects(like Silver Audio) include a special cleaning cloth with them, Actually the best connectors are made of solid, oxygen free copper. You just have to make and break your connections every so often the keep the juice flowing properly. Caig Deoxit is great for cleaning connectors, and blocking oxygen/dirt from the contact area.

Uh, just because gold is not a good conductor doesn't mean it doesn't sound good. You want to sit on your couch and listen to music, not sit on the ground behind your system with an oscilloscope, right? A lot of the hot new interconnects on Audiogon use gold as conductors. Check out the threads on the Gabriel Gold Revelation, KCI Silkworm, and the cables from Jade Audio. The reason the "high end" cable manufacturers don't use gold in their interconnects isn't because it's a bad conductor, but rather it's too expensive. These manufacturers sell their cables to dealers who double the price before selling to you. Making gold cables would be prohibitively expensive to these people, because gold is already expensive before the dealer markup. Gabriel Gold, KCI, and Jade Audio sell their interconnects direct, so they can afford to utilize gold. I have tried gold, silver, and copper interconnects, and I (and many others) feel that interconnects containing gold give you the best tonality, especially with vocals.

I agree that you should check out Jadem6's thread about interconnects. I use his interconnects in my system (Jade Audio Hybrids), and I can tell you he knows what he's doing! I would warn you that although it sounds like you can easily make wire from precious metals, getting them to sound good in an interconnect requires so much trial and error that you may be better off saving your time and paying someone else who has already done this!

Tomer

"Gold is not a very good conductor at all."

That is actually incorrect, though gold isn't quite as good a conductor as copper and silver it actually is a good conductor, not sure why some many people believe otherwise?

12 awg would not be "flimsy" at all but would cost a nice chunk of money. A 1M set of IC's takes 13' of wire, at your stated 12 awg you're looking at aprox. 8 oz of gold. At $1000 an ounce you're looking at $8000 just in metal value for a 1M set. I've done a lot of testing and thicker wire isn't always better, you'd be better off not using such a thick gauge conductor and save yourself quite a bit of dough. Also, I would skip the rhodium plating, it can really make it bright and/or grainy sounding and takes away some of that gold euphoric sound.

You will be able to make a pretty darn nice sounding cable but it takes alot of trial and error to get it sounding exceptional. Good luck and make sure and let us know how it turns out!

Regards,
John

Wow Gents, Thanks so much for you input! I am very new to Audiogon and feel quite blessed to have such great advise just for the asking. I will do some archiving and see weather or not I should even attempt this. It may be more involved than I had anticipated but at least I will know more than I did before! If anyone else has opinions or options, let it roll!

Irishwolf,
Since you are a Jewler you have access to some decent wire to start out with. A few years back when I first started working with gold I started out using 10K, 14K etc. Try using from 22 awg to 28 awg and you'll be able to build a decent sounding cable. Hope this helps you on your quest!

Regards,
John