2. cables
  3. 1215950921

Cable elevators - conventional wisdom wrong?

Reluctant to put any considerable money in them, the reasons for using cable elevators seemed intuitively correct to me: decouple cables mechanically from vibration and insulate them from the carpet's static. I have therefore built cheap elevators myself using Lego building blocks. (Plastic with a more or less complex internal structure; moreover, there is enormous shaping flexibility, for instance you can also build gates with suspended strings on which to rest the cables)
In their advertisement/report on the Dark Field elevators, Shunyata now claim that conventional elevators are actually (very?) detrimental in that they enable a strong static field to build up between cable and floor causing signal degradation.
Can anyone with more technical knowledge than I have assess how serious the described effect is likely to be? Would there, theoretically, be less distortion with cables lying on the floor? Has anyone actually experienced this?
karelfd
clio09
3,356 posts
 
The reason I use cable lifters (homemade version) is that it makes it easier for me to vacuum the rug without accidentally running over them.
dpang233
31 posts
 
Hi, Clio09

I second your comment. I tried with "Quartz made" ( exact English Name I may not be sure, Black-silverish Mineral:
and Padouk-wooden made elevators, really cannot feel anything. Now I had two extended plastic rod standing out horizontally behind the rack, and use Nylon (cloth-hanging type )ropes to make "hanging freely" my speaker cables and
Power cables. Some articles had products also selling
" free-hanging".... and much convenience for my maid
( though it is a restricted and protected area for her
to be near, but I cannot shoot her if I am not in the house
!!!! )
trelja
3,223 posts
 
Rushton is 100% right - try getting your cables off the floor, and give it a chance. I have personally heard the effects of lifting a cable off the carpet exceed the differences between cables themselves.

From an electrical standpoint, carpet serves as an enormous dielectric - and normally one of very low quality (nylon or polyester). Audiophiles spend enormous sums on cabling, accepting as fact the dielectric component, along with metal composition and cable geometry, add together to represent the sonic signature of the cable itself. Letting the cable sink down into the carpet, and take on the charactertistics of that dielectric equates to a significant amount of the money, effort, and benefit of purchasing better cable being wasted.
ozzy's avatar
ozzy
7,493 posts
 
I use some Myrtle blocks , Cardas and Ayre makes them. They are actually fairly cheap.
To get more height, I cut a little block out of some Maple wood and then place the myrtle blocks on the wood.
Heck, I think I have seen the Myrtle blocks cut with a V in the center to hold the cable.
You can stain or paint them any color.

Anyway, I own all Synergistic Tesla Cables and they recomended for some reason not to use the porcelin elavators I had.

I actually think they do sound better with the wood.
rodman99999
6,159 posts
 
Read the section of this article that deals with wire and resonances: (http://www.soundstage.com/maxdb/maxdb011999.htm) To the lithocephalic: Don't bother!
More to discover