Digital XLR vs. Analog XLR - Balanced Cables

The digital and analog XLR cables that Virtual Dynamics sells is the exact same cable, just one cable versus two for the analog pair.

So all XLR cables are wired the same? How about the XLR jacks? Are hot, neutral and ground all terminated the same? I think not but I may be wrong. For AES/EBU input and output jacks are all terminated with the same pattern.

Right. The devices may not be connected in the same way although those differences are less common these days. Nonetheless, the only reason for not having the usual direct connections in the cables is to compensate for differences between the devices on each end.

Kal

I've played with this exact scenario a lot over the past few months. I've been using a Cardas Golden Ref analog XLR, and a Cardas Digital XLR Cable. First as has been discussed here already the connection pattern is exactly the same. Meaning they are interchangeable as far as as termination and connection. Secondly the analog XLR does almost as good a job as the digital XLR cable. I'm no expert in explaining what the differences are electrically or anything, but I can give you my opinions based on actual sound comparisons. Third in one of your follow up posts you mention "getting a pair of digital XLR cables". Unless you have more than one DAC you'll only need a single digital XLR. Lastly I have found significant sonic improvements by keeping the digital signal in the digital realm as far down the chain as you can get it. If you do the digital realm can compete favorably with even the best analog rigs. There are some companies that make digital preamps and amps which if you don't need an analog option for a turntable, or have a very large budget, will improve your end sound as it relates to price point.

Mmike84 - It all depend on the DAC. If you use asynchronous up-sampling DAC that rejects jitter like Benchmark it won't make much difference what cable you use. I built my RCA to BNC cable using 75 ohm Canare coax.