2. cables
  3. 1227142966

Long IC Cable Run


Hi, I'm in the process of sorting out a new room in a new house. The configuration I'm shooting for requires running 16 feet of cable from my preamp to amp, and I'm wondering if an unbalanced RCA type configuration will be ok considering the long length? Otherwise, can my components be modified and made balanced (they are all unbalanced)? My system consists of a Rogue 99 Magnum preamp, Threshold S300 amp, and Arcam cd36 player. My speaker cables are Synergistic Designer Reference, power cables are VH Audio flavor 4, and no interconnects yet . . . Thanks.
128x128bdalessio
jwpstayman
399 posts
 
The ideal solution for this application is the Photon AMP cable from Harmonic Technology (formerly Cyberlight). This presents a load to the pre of about 12" of interconnect and since the audio signal is converted to light and back to audio, there is ZERO chance of any ground noise or hum. Not a cheap solution to be sure, but an excellent one. Check with Mark at Rogue - they showed with HT Cyberlight cables at CES a couple of years back. Good Luck!
audiofeil
4,011 posts
 
>>11-20-08: Tweak1
Even XLR cables this long can degrade the sound<<

Totally and unequivocally not true.

Balanced cables were designed for much longer runs than 16'.
stanwal's avatar
stanwal
3,147 posts
 
Tweak1 is wrong. That long cables are bad and long wires are good is the position of Pierre at Mapleshade and some others. That long interconnects are better than long speaker wires is maintained by Martin Colloms and others. I have tried both and find the latter to be correct. But as the others say use care in selecting the cable you use. I use SilverBlue from Audio Synthesis. I have no idea of its current cost. And be sure that the preamp can drive the cable. It is best to check with the manufactures. I use unbalanced over 4M and it works very well.
More to discover