Anti-cables!!
Speaker cable for 25 foot run
I am looking at various options for speaker cable for a 25 foot run without breaking the bank. Amp is the McIntosh 6600 integrated and speakers are the B&W 805S. Am considering Signal cable, Morrow and Audioquest Rocket 44. All would be in a bi-wire configuration. Anyone with any experience, comments or alternatives would be appreciated. Would like to keep the budget in this price range (say less than $1,000). I know that Morrow has a 60 day audition period, but I know that most manufacturers don't offer this.
- ...
- 7 posts total
With a run of that length you'll want to be careful with respect to gauge selection, particularly for the low-frequency cable in your bi-wire arrangement. The 805s spec sheet recommends a maximum cable resistance of 0.1 ohms (which I think is probably a good target value for most speakers). I assume they are talking about one-way resistance, which would mean 0.2 ohms for the round-trip through both conductors of each of the two bi-wire cables. Here's a link to a wire gauge/resistance table: http://en.wikipedia.org/wiki/American_wire_gauge A quick calculation from the table shows that you'll want to go no thinner than 16 gauge, and 14 or perhaps even 12 would be preferable. Regards, -- Al |
Disclaimer: I am the owner of PNF Audio. www.pnfaudio.com We make custom length speaker runs and you get your choice of color and termination. We won Absolute Sound Magazine's Editors Choice Award in 2007 and 2008. They said that we make one of "the BEST reasonably priced cables on the market" A 25 ft run will put you way under $1000 (near half). steve@pnfaudio.com |
- 7 posts total