preferred interconnect for FM tuner

I'm getting rid of my audioquest diamondbacks. XLR on the amp end RCA on preamp 1.5m I connected a pair of Audiometallurgy GA-0 .5M to my Linn Kudos Tuner and they sounded great right out of the box. I got another set of .5M for the EQ to Preamp, and I'm waiting on a 1.5M set w/RCA's for the Amp to EQ. They are great sounding and very reasonable especially if you win bidding. Happy listening.

If by "a bit noisy" you mean that there is significant background hiss, more so or less so depending on the signal strength you are receiving from the particular station, the right way to fix it is with a better antenna, not by changing interconnects.

If you are really intent on reducing hiss with an interconnect, though, choose one with the highest capacitance you can find.

Regards,
-- Al

Thanks Al,

Even on the strongest stations, this is not the quietest or highest resolving tuner. With that said, it has good overall tone and sounds "pleasent" enough, especially with the previous ICs I had on it. The AQ Diamondbacks seem to fight against rather than embrace the warmer qualities of the tuner. Not so much trying to fight hiss as willing to sacrifice some analysis for more warmth.

Does your high capacitance suggestion hold for this?

Does your high capacitance suggestion hold for this?

Yes. Higher capacitance would slightly roll off (attenuate) the upper treble, to a greater or lesser degree depending on the output impedance of the tuner and the length of the cable. That would give the lower frequencies which are responsible for warmth a slight relative emphasis.

Regards,
-- Al