Best interconnects for Velodyne DD series

Hi Fplanner!
I´ve been thinking about Synergistic Research Resolution Reference IC:s. There´s one cable for sale, but will it do for Velodyne DD10 where you have L/R inputs and one balanced.
On their homepage Subwoofer Tesla series I noticed Y-connection on one side but not on the other side.
Why is that?
Surely they must have an e-mail adress, can´t find it.

Appreciate opinions & advice!

Many Thanks!

I needed 2 cables for my setup and my guess is that you probably do as well, but I would make 2 calls.

First 1 to Velodyne - there is a tech guy in Arizona that is very good. Depending on what he says after you describe your setup and what you are trying to achieve, if you DO need a 2nd cable, I would call either Ted or Elliott at Synergistic. All three of these are good guys and will be happy to help you solve your situation.

If you're thinking of expensive ICs then go the distance and replace the stock internal speaker wire between the plate amp and the woofer. For my DD-15 I used a DIY silver litz braid, but any high-quality speaker wire will be an improvement. Replace the cheap connectors on the plate amp with directly soldered connections. Also, if you have a balanced preamp and a long cable run you can try a LF Jensen Isomax transformer at the sub for XLR/RCA conversion and galvanic isolation. Finally, if you're handy, for a big improvement replace the 4-pin rectifier bridge on the plate amp with a bridge made of Cree Schottky SiC diodes.

Hi Dgarretson!
I´ve already followed the advice on sub You gave a while back changing rectifier/internal cable. It was improvement with better distinct bas. But there might be a "missing link" between pre and sub. Maybe exaggerating but I´m willing to give it a try.
(Glad to hear that you´re happy with Dueluns resistors for your Merlins)

Many thanks for all advice.

Happy Listening!

Clabe, Woops, I had forgotten. I guess it's time for me to try some fresh ideas rather than recycle. Thanks for recommending those Duelund resistors!