Mert,
Congratulations on recognizing that every aspect of the electrical system can influence the sonic presentation. You obviously have an open mind and are willing to experiment. I've been chasing the electrical culprits for the past two decades. Having dedicated lines is not enough. I've worked with my dealer (Rainwater Audio, 843-665-6113) on a number of other improvements. I use the Oyaide R1 wall outlet with the WPZ wall plate and filters (parallel and peizzo electric). I also have the Oyaide R1 outlets on my Pure Power 2000 re-generator. Pure Power puts out a constant 120V/60Hz stream and does not limit the current. Experiments have shown that the AC current converted out of its battery is actually greater than what comes out of the wall. Dampening the vibrations of the electrical system (in the circuit box, at the wall, and on the PCs) further improves the sonics.
And yet, with all of these upgrades, the Elrod Statement Gold power cords made a big difference in my system on every component. How can this be??? 1) RFI originating outside and inside the house is in the air and gets into power cords that are not sufficiently protected from this noise. 2) The components can generate RFI/EMI and pass it on to other components. 3) Some appliances generate noise which gets to the audio components. With a little bit of work, it's not difficult to verify these observations about the effect of RFI/EMI on the electrical system (as well as on interconnects and speaker cables).
For me, the audio forums have been a valuable source of information contributed by audiophiles and a platform for sharing my observations. Thank you for sharing your observations.
Congratulations on recognizing that every aspect of the electrical system can influence the sonic presentation. You obviously have an open mind and are willing to experiment. I've been chasing the electrical culprits for the past two decades. Having dedicated lines is not enough. I've worked with my dealer (Rainwater Audio, 843-665-6113) on a number of other improvements. I use the Oyaide R1 wall outlet with the WPZ wall plate and filters (parallel and peizzo electric). I also have the Oyaide R1 outlets on my Pure Power 2000 re-generator. Pure Power puts out a constant 120V/60Hz stream and does not limit the current. Experiments have shown that the AC current converted out of its battery is actually greater than what comes out of the wall. Dampening the vibrations of the electrical system (in the circuit box, at the wall, and on the PCs) further improves the sonics.
And yet, with all of these upgrades, the Elrod Statement Gold power cords made a big difference in my system on every component. How can this be??? 1) RFI originating outside and inside the house is in the air and gets into power cords that are not sufficiently protected from this noise. 2) The components can generate RFI/EMI and pass it on to other components. 3) Some appliances generate noise which gets to the audio components. With a little bit of work, it's not difficult to verify these observations about the effect of RFI/EMI on the electrical system (as well as on interconnects and speaker cables).
For me, the audio forums have been a valuable source of information contributed by audiophiles and a platform for sharing my observations. Thank you for sharing your observations.