Best Phono Cable for SME Series V


I have recently acquired an SME Series V tonarm and would like to replace a) the standard tonearm wire with a high-quality phono cable to connect the tonearm with my phono pre (Omtec Antares CP-1i V4). I was told Cardas Golden Reference is nice as well as the products from Furutech and Nordost.
Furthermore I would like to replace the four tiny cables which connect the cartridge (Lyra Delos) with the tonearm itself (are these tiny cables available from different manufacturers?).
Any recommendations ? Thanks!
frankpiet
The OEM SME vdH cable sucks. Sounds like you're listening through a blanket.

The PAD cables are great. I can only afford the Venustas, but John has gone right up through the line, so you can believe him when he says they get even better.

Cardas GR, Graham IC50, Hovland Music Groove 2 aren't bad. used to be the three best.

Sleeper of the year at $600 (you can audition one for free) is the Silver Breeze from Silver Audio http://www.silveraudio.com I would have bought one if I hadn't accidentally scored a Venustas @ CES for about the same price)

I haven't heard either Siltech's or Stereovox's phono cables, but at $4k+ and $2K+ respectively, they better be good ;-)

For headshell leads, there are so many good ones. Cardas, vdH Litz or SME Litz (same part), Audioquest, Sumiko, Nerve, Jelco, Ortofon . . . . . I'd go with the vdH/SME or the Cardas (after checking with Lyra ;--) but more important, if your tonearm is older than ~10yrs (not exactly sure, email the factory and check the serial number) you should do the the internal wiring upgrade, to the newer vdH MCS 150 silver Litz. I did mine and it made an audible difference. The factory will service the arm and install the new wire for around $350.
Purist Proteus Provectus using this on my Graham Phantom2 wonderful great staging quiet great bass etc.
Hi Nsgarch: my SME V is from 2008. Regarding the headshell leads Ikeda silver wire was highly recommended to me by a dealer. I have talked to Chris from Stereolab - they do not officially build tonearm cables.

Given the excellent reputation of the PAD cables I will give them a trie. Has anybody ever experienced the bigger Nordost, Siltech or Stealth phono cables ?
Hi Frank: I'm pretty sure your arm has the latest internal wiring. The Ikeda silver sounds lik a good wire -- but basically, all silver litz wire is the same. The important difference between various ones will be in the quality of the clips, and the strength of the solder connections; and in that regard, I think Cardas is probably the best.

Stereolab? StereoVOX does make TA cables, but I think production is down while they reorganize the company. You can't go wrong with Purist, that's for sure. I've never had a second thought about buying them, and would probably stay with PAD if I could afford to upgrade.

On the other hand, if you can't find some used Purist, or if money is tight for you right now, you should call Max at Silver Audio and see if he'll lend you some Silver Breeze to try. They seem to have developed a cult following, and what have you got to lose? I never drank the Nordost Kool-Aid, and haven't heard Stealth or Siltech.

Neil
Neil,

I am wondering if you had a chance to compare the Silver Breeze with tonearm cable with the Purist Audio directly? I have two SME V's and I am thinking about swapping out phono cables as well. I am leaning towards the Silver Breeze as it seems to be pretty consistent in regards to performance in comparisons to other top league cables.

These two cables use different metals, the Silver Breeze silver the Purist's use copper, hence my question. Thanks in advance.

Ciao,
Audioquest4life