HiDiamond Power cords...

@Sabai, I absolutely agree with you about sonics. If I was to order the Oyaide M1/F1 male/female connectors could I change these myself without soldering and will I have a definite upgrade similar to what you described as better sound stage, detail/definition, and tonal qualities/harmonics. I really would like to experiment with that if its a no brainer to swap.

The Graphite plugs and IEC's I purchased will not replace what is on my HD Cables.
I plan on making a couple of DIY power cables using high quality silver/ copper wire.

Bacardi,
If you order the M1/F1 all you need to do is take the terminations off the Power 3 and replace them with the Oyaides. There is no soldering required. Just make sure you get the soldered ends tightly into the slots. You have to familiarize yourself with the Oyaide construction first. The aluminum casing screws on and off. And at the base there are 2 screws for stabilizing the cord in the housing. Then there are the two long screws that let you get inside the housing so you can loosen the inner screws to get the work done. Make sure you mark the ground so you don't get any connections mixed up.

The make up... configuation... and construction of the Oyaide M1/F1 is a work of art.

Sabai..if all you do is replace the terminations what is responsible for the improvement in sound..?..just wondering as i am not that electrically inclined..thanks