HiDiamond Power cords...

Bacardi,
If you order the M1/F1 all you need to do is take the terminations off the Power 3 and replace them with the Oyaides. There is no soldering required. Just make sure you get the soldered ends tightly into the slots. You have to familiarize yourself with the Oyaide construction first. The aluminum casing screws on and off. And at the base there are 2 screws for stabilizing the cord in the housing. Then there are the two long screws that let you get inside the housing so you can loosen the inner screws to get the work done. Make sure you mark the ground so you don't get any connections mixed up.

The make up... configuation... and construction of the Oyaide M1/F1 is a work of art.

Sabai..if all you do is replace the terminations what is responsible for the improvement in sound..?..just wondering as i am not that electrically inclined..thanks

Raks,
I feel the same way.

Calloway,
With all due respect, there is a world of difference between stock or common terminations and the Oyaide M1 and F1. You have to try them to understand. The more "evolved" your system the more sensitive it will be to this kind of modification. I imagine that inexpensive systems might not benefit as much.

Sabai..you didn't answer my question. let me try again..HOW/WHY does just changing the terminations of a powercord make a big difference,,?..i am not questioning the change..just wanting to know what causes the change,,i will assure you that MY system is very 'evolved'..