Hidiamond vs Hifidelity interconnects

HiFial,
I would say after 30 plus years of playing in this great hobby, my system is also very resolving and bordering on live sounding. With my DCS front end and Pass Labs combined I need a very phase coherent cable that has no tendencies at all and that is where all other cables have failed in my system. I also tried the D7 speakers cables and at $1300 for a 2 meter set I thought they were very good sounding but the D8 speaker cables are a complete different level; not sure why. I also run a full loom of HD cables and have P4 power cables throughout the system rather than mixing and matching cables. I did have some of the second tier cables by HD and thought they were very good for the money but the HD top cables are a complete different level than their second tier cables, as I assume this is true with other top cable manufacturers. I am not sure what HFC speaker cables cost but at $2300 the D8 is the best speaker cable I have heard in my system over the last
30 years with a bass energy that takes my speakers down a full octave. The P4 power cables also are the best I have heard and at $1800 they cost almost 1/3 of the cost of my previous power cables. I did find adding the P4 to complete the loom made a huge difference with the overall sound because other power cables that I tried with the HD speaker cables and interconnects were getting exposed. I not saying what you heard in your system was not what you heard but now that I am using the top HD cables and P4 power cables combined, the real emotion is there and with other cables is was only close.
I totally agree that disconnecting any cable can really hurt the sound of that cable for many hours after reconnection and perhaps even more so on the HFC because of their design but I do not understand how any cables hooked up after you take the HF cables off would benefit; could you please explain?

Hi Paz307. Could you tell me which HFC you had tried in you system and did you try them all at the same time? Also for how long were they in your system without being moved and about how many hours of play time were on them in your system? Your answers would help in answering you.

"I totally agree that disconnecting any cable can really hurt the sound of that cable for many hours after reconnection and perhaps even more so on the HFC because of their design but I do not understand how any cables hooked up after you take the HF cables off would benefit; could you please explain?"

Let me have some time to put my thoughts to words on this. But Rick can do a much better job then I will be able to.

On the HD cables. My disappointment and gripe is that so many on the HD thread here on Audiogon praised the D3 Power Cord using the virtues that you and Bigkidz express for the D4 PC and HD8 SC.
I am glad to hear that the higher end HD cables live up to the praise. But from my experience the mid point to three quarters point in a line should give one most of the bang (85-95%) for the $$$. When I bought the P3 it was at the top to just one below just after that. The D7 is one from the top (though I do like the D7 out of all the other HD I had in my system). The HD interconnect I had D2 XLR was one from the top. So seeing how for the most part all my HD were one from the top in the line I should have had 90%-95% of the top in the line.
By the way the price of $1,800 for a D4 is for a 1 Meter. I think most people would use a 1.5 to 2 MT at $2000-$2200. Not a huge amount but when most of us need several PC it adds up.

Hifial,

I'm in Montville, NJ 07045. I will send you a message.

Peter

I would second Paz307 opinion, having own both Hd xlr 3 ,xlr2, D8 sc, P4,and HF ct1e IC , ct1 sc. Hd top of the line product are far much superior than their lower line , first I bought their p3 pc because reading the thread and found them to be good but not great but when I try one p4, it really something special,I now owned 8 of them .xlr 3 ,D8 also many steps above xlr2 and d7, but xlr2 already better cardas clear in my system. For HF ct1 and ct1e is also a great cable, they are more neutral and yes I always want to increase my volume to hear more and more, while Hd is a little warmer, with more air ,a little less precise (background not as black)but in my system very involving,I would say better wood sound. So it all depend on system and music you listened. In my opinion HF ct1 is much better than Hd xlr2 but HF ct1e is the same level with Hd xlr3 while HD d8 sc better HF ct1sc, but with full system of Hd top of the line including p4 pc ,the search is over for me.

HF interconnects CT1 E was the model I tried and the cable was fully broken in. I would first like to start by saying the HF cable was very good but in my system which can be very detailed to start with, the top HD cables brought out the emotion better than the HF cables. What I really like about this tread is that no one is trashing each other but instead just explaining what the differences were that they heard in their system. I did not try the HF speaker cables because for me the D8 speaker cables are simply stunning in every aspect. I did compare the D8 speaker cables to several other brands of top speaker cables when I first bought them, some costing 2-3 as more and the D8 are the best I have ever heard in my system. It was the combo of the top HD cables that took my system to the next level not just 1 cable. My experience was very similar to Noom, finding that the P4 power cables are simply another level compared to any power cable I have had in
my system and same goes with the D8 speaker cables and XLR3 interconnects but in my opinion this will be system dependent. In my system the best way to describe the difference is that the HF cables lean towards the analytical side and the HD cables lean more toward the analogue side.