New Esoteric P02 D02

I have just asked esoteric of the same question, here is their reply (applicable to G-0Rb only, NOT G-01)

"Because a PLL circuit of P-02 isn't used, connection 2 is more simple than 1 as circuit.
Please try connection 2."

If I understand correctly,
using (1), sync freq between P-02/D-02 is at 176.4kHz, and P-02's PLL is in the loop
using (2), sync freq between P-02/D-02 is at 22.579MHzHz (and PLL is OUT of the loop), and the source reference clock is provided by G-0Rb (not oscillator inside D-02)

IF the above understanding is correct, if the clock is G-0Rb or G-0s, (2) should be better in technical theory?

I have not tried the 2 different connection yet, as I am still burning in P-02/D-02 now (close to 200 hours mark)

Regards,...

Hi Guys, Hi Eelii, How are the tunes with the 9500's? I have been trialing the Synergistic Research Element cords with the latest Powercell mk3 ! This is a very different sound and really works well with jazz and rock for me, but the jury is still out!
As for the clock, Tim Crable from Esoteric e-mailed me and gave me the
" best way" to hook up the clock is both P-02 & D-02 directly to the clock and use the A1 & A2 ports turning off all other off. There were several reasons stated for this and it was the G-01 , not the Grb, but the logic is the same. As for the output, when you hook up to the Word in BNC on both the D-02 & P-02, I assume you went into the menu and turn off the word out on the D-02, that bypasses the clock in the D-02, and the P-02 has no clock so the combo cannot see a signal from the D-02!

Eelii, Have had the SR cords and Powercell for two weeks, have barely listened to them, baby has had all the attention. Tough to listen to music with a two week old baby ! But my impressions so far are very favorable! With jazz and rock very helpful in expanding the dynamics that may be squelched with the recording process. But there is an element of change to the music I cannot explain yet. How are the 9500's in your system? I will keep all posted of my findings... Got to get back to Madagascar, seen this movie fifty times... Funny what a 2 year old gets obcessed with! I wonder if music will be next, Hmmmm, better get a good education, this is cheap!

Dear Colekat,

"There were several reasons stated for this and it was the G-01 , not the Grb, but the logic is the same."

While I am not sure which one is better as I have not tried, the logic is not the same.

G-01 can output 22.579MHzHz, but G-0Rb can output max 176.4kHz. That is why there is such question,
1) G-0Rb (176.4kHz) --> P-02 + + G-0Rb (176.4kHz) --> D-02
2) G-0Rb (176.4kHz) --> D-02 (22.579MHzHz) --> P-02
especially
- page 6 of D-02 owner's manual http://www.teac.co.jp/audio/manual_esoteric.html
- page 42 of this powerpoint http://esoteric.teac.com/download/P-02/Downloads/P-02:D-02_Power_Point.ppt

cheers,

Hi Opera Lover, Hope you are enjoying your Combo. I was unaware that the Grb did not output 22.579Mhz. I do know , as you stated, you want to stay away from using the PLL circuitry if it all possible. I have my rig connected directly from clock to both D-02 and P-02 directly, and the clock is output 22.579 Mhz. I also used the clock output at 176.4, but clearly perferred the 22.579 output. Music sounds very natural with the clock at any output into the D-02/P-02. Hell, music sounded great without the clock, but the clock takes it to another level. I don't know how there could be any clock doubters out there, it is easily the best upgrade I have made, and that includes all cables, and adding the C-02 preamp. I heard an immediate improvement and I would find it difficult to listen without the clock now that it is in the loop.