If I can jump in on the topic, I don't believe the OP meant that single-ended cables can transfer a signal in the same way a balanced cable does, or that single-ended cables can interface between two balanced components, but rather that the design of a signal ended cable is sometimes referred to as a balanced design in cases where the positive and negative conductors are of the same type and gauge, and treated the same geometrically. This is most prevalent as a twisted pair type cable, most often made with a separate braided ground shield that is only connected at the source end. This type of single-ended cable is in contrast to those where the positive and negative conductors are dissimilar, such as in coaxial cables where the braid shield also serves as the ground/return conductor.
Anyone else making their own cables?
Over the years I have owned a lot of different brands of very sought after and very expensive cables(interconnections both balanced and single ended and speaker cables). Each time selling and then trying another. I recently have been experimenting with making my own. I have been doing a lot of reading on the subject of design. Also I have been dissecting some old inexpensive ones I had lying around. I am starting with ic's. From my experience and what I have read, when done right balanced is the superior method. What I had not realized is that single ended cables can be balanced as well. In fact Annolog(vinyl) starts out as balanced. This is the way I have chosen to make my cables. Also I have found that grounding at the receiving end and simply connecting the grounds at the sending side works best and in my view is the only real reason for directional cables. I have been using wbt and eichmann ends. I would like to hear from others with knowledge of design, cable types and materials, soldering, end type(brands) and their benefits and covers to improve final appearance. I would also be interested in any other point I have not mentioned or to simply disagree with any assertion I or anyone else makes on this subject. I do realize that cables are the single most controversial subject in this hobby. I am not trying to settle that argument. Just offer another option. It may even prove cheaper to buy a brand cable then make your own. I do not have a degree in engerneering nor am I an electrician or computer genius. Just a long time audiophile. My single ended cables are for vinyl set up(turntable to step up transformer to phono stage). Balanced everywhere else. My system is fully balanced(as earlier described) from end to end. Thanks for informative insights.
- ...
- 17 posts total
- 17 posts total