Does it bother you?


I'm a recording engineer who has worked in some of the world's top facilities. Let me walk you though an example signal path that you might find in a place like, say, Henson Studio A:

1. Microphone: Old. Probably a PCB inside. Copper wiring.
2. Mic cable: Constructed in house with $1/ft Canare Star Quad, solder, and a connector that might have been in the bottom of a box in the back.
3. Wall jack: Just a regular old Neutrik XLR connector on the wall.
4. Cable snake: Bundles of mic cables going to the control room.
5. Another XLR jack.
6. Another cheap mic cable.
7. Mic preamp: Old and lovely sounding. Audio going through 50 year old pots.
8. Patchbay: Another cheap copper cable is soldered into a patchbay where hundreds of connectors practically touch.
9. TT Cable: Goes from one patch to the next in the patch bay. Copper. No brand preference.
10. DB25 connector: Yes, the same connector you used to connect a modem to your computer in 1986. This is the heart and soul of studio audio transfer.
11. DB25 cable to the console: 25 strands of razor-thin copper wire, 8 channels of audio, sharing a ride.
12. The mixing console: PCB after PCB of tiny copper paths carry the audio through countless op amp chips.
13. DB25 cable to the recording device: time to travel through two more DB25 connectors as we make our way to the AD converters or tape machine.
14. AD conversion: More op amp chips.
15. Digital cable: nothing fancy, just whatever works. USB and Firewire cables are just stock.

...and this is just getting the audio into the recorder.

Also:

None of this equipment has vibration reducing rubber feet, it's just stacked haphazardly in racks. Touching.

No fancy power cables are used, just regular ol' IEC cables.

Acoustic treatment is done using scientific measurements.

Words like "soundstage" and "pace" are never uttered.

Does it bother you? Do you find it strange that the people who record the music that you listen to aren't interested in "tweaks," and expensive cables, and alarm clocks with a sticker on them? If we're not using any of this stuff to record the albums, then what are you hearing when you do use it?
trentpancakes
No, what you don't know will not bother you, unless you an audio engineer. Ignorance is bliss. In the end, if the recording sounds bad, the listener is not really interested in why. Bad is bad.
What I find surprising is that many small ensemble jazz recordings in the late 1950's and early 1960's sound better (more realistic, so to speak)--- often by a wide margin --- then most recordings of today. Any explanations from an engineering or engineering approach perspective as to why this might be?
I recently visited a local recording studio with fine equipment. But the recording techniques still gave me pause. Individual (pop recording) instruments were recorded with two mikes, but not to create stereo localization but rather to pick up some natural reverb. (Which is fine.) Thus any sound stage effects are the result of mixing.

This puts a bit of a kabosh on what had been my touchstone for audio: accuracy. I can't know what sound stage effects are inherent in any vinyl or CD rendition. Therefore I can't judge accuracy of reproduction by listening. I think the same logic applies to frequency balance.

Further, to add fuel to the fire, I read in some high end sites and magazines about outstanding spacial and sound effects that I never hear in live performances whether orchestral, chamber music, or pop group. Rather than pinpoint localization of instruments in space, I hear more of a blend with significant directionality. That is very much like what I hear on my speakers. So what is it that those guys are hearing?

So it seems impossible to determine what sound illusions (stereo images are of course an illusion)are more accurate. Just what you like.

Are we reduced to looking at measurements and calling the relative absence of distortion and coloration "accuracy"? I think so.
Any kind of popular music is a business, 98% of the people who buy it have zero concept of what sounds good or doesn't.
Why waste the money on good gear ?