Many audiophiles treat music as if it was fragile, carefully passing it to speakers over kilo-buck elevated wires and through a dozen other danger spots that could break it. But music is incredibly resilient. Pump it through ninety miles of air and to a transistor radio, and it's still captivating and foot-stomping joy. It can be made more enjoyable at the playback end, but we can easily lavish useless "everything matters" obsession on its care and feeding, which is no different than other obsessions.
Does it bother you?
I'm a recording engineer who has worked in some of the world's top facilities. Let me walk you though an example signal path that you might find in a place like, say, Henson Studio A:
1. Microphone: Old. Probably a PCB inside. Copper wiring.
2. Mic cable: Constructed in house with $1/ft Canare Star Quad, solder, and a connector that might have been in the bottom of a box in the back.
3. Wall jack: Just a regular old Neutrik XLR connector on the wall.
4. Cable snake: Bundles of mic cables going to the control room.
5. Another XLR jack.
6. Another cheap mic cable.
7. Mic preamp: Old and lovely sounding. Audio going through 50 year old pots.
8. Patchbay: Another cheap copper cable is soldered into a patchbay where hundreds of connectors practically touch.
9. TT Cable: Goes from one patch to the next in the patch bay. Copper. No brand preference.
10. DB25 connector: Yes, the same connector you used to connect a modem to your computer in 1986. This is the heart and soul of studio audio transfer.
11. DB25 cable to the console: 25 strands of razor-thin copper wire, 8 channels of audio, sharing a ride.
12. The mixing console: PCB after PCB of tiny copper paths carry the audio through countless op amp chips.
13. DB25 cable to the recording device: time to travel through two more DB25 connectors as we make our way to the AD converters or tape machine.
14. AD conversion: More op amp chips.
15. Digital cable: nothing fancy, just whatever works. USB and Firewire cables are just stock.
...and this is just getting the audio into the recorder.
Also:
None of this equipment has vibration reducing rubber feet, it's just stacked haphazardly in racks. Touching.
No fancy power cables are used, just regular ol' IEC cables.
Acoustic treatment is done using scientific measurements.
Words like "soundstage" and "pace" are never uttered.
Does it bother you? Do you find it strange that the people who record the music that you listen to aren't interested in "tweaks," and expensive cables, and alarm clocks with a sticker on them? If we're not using any of this stuff to record the albums, then what are you hearing when you do use it?
1. Microphone: Old. Probably a PCB inside. Copper wiring.
2. Mic cable: Constructed in house with $1/ft Canare Star Quad, solder, and a connector that might have been in the bottom of a box in the back.
3. Wall jack: Just a regular old Neutrik XLR connector on the wall.
4. Cable snake: Bundles of mic cables going to the control room.
5. Another XLR jack.
6. Another cheap mic cable.
7. Mic preamp: Old and lovely sounding. Audio going through 50 year old pots.
8. Patchbay: Another cheap copper cable is soldered into a patchbay where hundreds of connectors practically touch.
9. TT Cable: Goes from one patch to the next in the patch bay. Copper. No brand preference.
10. DB25 connector: Yes, the same connector you used to connect a modem to your computer in 1986. This is the heart and soul of studio audio transfer.
11. DB25 cable to the console: 25 strands of razor-thin copper wire, 8 channels of audio, sharing a ride.
12. The mixing console: PCB after PCB of tiny copper paths carry the audio through countless op amp chips.
13. DB25 cable to the recording device: time to travel through two more DB25 connectors as we make our way to the AD converters or tape machine.
14. AD conversion: More op amp chips.
15. Digital cable: nothing fancy, just whatever works. USB and Firewire cables are just stock.
...and this is just getting the audio into the recorder.
Also:
None of this equipment has vibration reducing rubber feet, it's just stacked haphazardly in racks. Touching.
No fancy power cables are used, just regular ol' IEC cables.
Acoustic treatment is done using scientific measurements.
Words like "soundstage" and "pace" are never uttered.
Does it bother you? Do you find it strange that the people who record the music that you listen to aren't interested in "tweaks," and expensive cables, and alarm clocks with a sticker on them? If we're not using any of this stuff to record the albums, then what are you hearing when you do use it?
- ...
- 78 posts total
- 78 posts total