Audio Magic Pulse Gen products

Hi5harry, Good info above. This idea also addresses something I have been wondering about. If you wire the pulse gen to the iec from the inside, you would have to make sure it is not defeated by the power switch, otherwise, its only going to be active when the equipment is turned on.
I obviously agree on the MiniRef II. Makes you wonder what the Oracle is like, doesn't it? I bought my MiniRef used from a guy who after finding how good the mini ref was had to have an Oracle.

Hi guys,
Sorry for not chiming in again earlier Ozzy. My experiences correlate precisely with Hi5harry's pretty much on everything we experience aurally which is reassuring. I think Brownsfan is onto something guessing that something in your rig is voiced in that direction. All his products have never sounded too sharp in my experience. If anything a bit subdued initially instead. BUT I didn't add four Pulse Gens simultaneously. They do gain in image body density. I'm guessing you're hearing that by now.
I did receive and place two medium PEAs in a couple days ago. PEAs are something else! Takes five minutes to control its field. Improvements from the bottom to the top. Focus Air (with a capital A) dynamics depth harmonics all add up to increase emotional impact. "It's NOT subtle" This is behind the speakers on the bybees @ the binding posts. YMMV.
We've never compared High5harry's MiniRefII with my Oracle. They are both excellent products. Brownsfan perhaps you could inquire how the seller feels about his upgrade. I really try not to disparage anyone's products especially since we listen in different rooms with personal sonic priorities, and our systems are moving targets among themselves. Kinda amazing it works as well as it does. In the context of my experience though the Oracle has substantially improved upon a long line of power conditioner/regeneration units I've owned since the mid-eighties. Hope this helps.

Thanks for the additional postings. A liitle more information...

While I was waiting for the Pulse Gen's and another P4 HiDiamond Power cord to arrive I took out all of interconnects, power cables, etc. and re-cooked them on my Audiodharma Cable cooker.

After installing the Pulse Gens in the equipment, I re- connected all of the cables, including the recently acquired and now recently cooked HiDiamond P4 power cord. The HiDiamond P4 power cord is very thick and still will take along time to fully break in.

The first day with the Pulse Gen's connected the music sounded a little sharp , but today 2 days later, the sound is settling in nicely with a very wide soundstage.

Ozzy, good to hear things are settling in a bit. Keep us posted.

Emoonie, how much info did you get from Jerry on the PEA's? I take it the three sizes vary with respect to the size of the field. If that is correct, do you know how large of a field each size creates? I could perhaps use 4 minis plus maybe one medium to place above my Mini Ref II and between the pre amp and its power supply. Or, if the field of the medium size is big enough, I might be better served to buy two medium size PEAs to go with each of my monoblocks, and perhaps the field would extend to the crossovers on my Maggies.

Brownsfan, I was told the smallest PEAs were a quarter strength of the medium ones. They'd suffice nicely inside components and would be complimentary to the Pulse Gens. He suggested two mediums to start and try them behind the speakers. I regularly find his suggestions are spot on. Haven't tried them anywhere else in my rig as I'm enamored with their effect but did move them around a friend's in other positions because his are actively tri-amped and my preferred spot(so far in my system)is not readily available. Sounded best on top of his DAC/transport by far. Settled (charged?)from twenty seconds to about five minutes. Didn't seem to be noticeably effective on the phonostage, linestage, by his ICs into the speakers or the AC cords into the speakers. From my very limited experience I'd recommend two medium ones and place them on the X-over @ the speaker wire side. Then again here my amps are underneath the eight inch tall X-overs so perhaps the field permeates to them also. Nice thing is with them being self powered moving them around and back is a snap. Hope this helps.