Finally taking the leap to Monoblocks

Sean, I think you might be wrong about the Bryston. You are referring to the 7B right? I think from the Bryston homepage it says 500 watts at 2 or 8 ohms, and 800 watts at 1 or 4 ohms. I think on the 7B you can have the output stage operate in series or parallel. One of these settings helps you to drive insanely low ohm speakers without tearing up the amp. If this analysis is not correct someone please enlighten me.

According to "theory", a SS amp should "double down" as impedance is halved. To reverse this, as impedance is doubled, power output would be cut in half. In English, a 500 wpc amp @ 8 ohms SHOULD be a 1000 wpc amp @ 4 ohms and 2000 wpc @ 2 ohms, etc... As you know, the vast majority of power amps come nowhere close to doing stuff like this. It takes a MASSIVE power supply, very rugged output devices, a LOT of heatsinking, etc.... to achieve results like this. That is why the "big monsters" like Krell's, etc... that DO achieve results like this are both BIG and EXPENSIVE.

If what you say about the Bryston's is true, they are using some type of output transformer between the transistors and the speakers. While Mac has done things like this in the past, it is rather unorthodox with modern design technology. To my way of thinking, it would typically result in reduced bandwidth and a loss in overall sonic quality as compared to a similarly built "direct drive" amplifier. Then again, there are ways around just about anything if someone has the time and money to do the necessary research. Then again, maybe having an output transformer with various impedance taps ( like a tube amp ) actually GAVE them the sonics that they wanted. I guess it is something to check into. Sean
>

You just won't be able to get better sound for the money than buying a pair of BelCanto EVo 200.2 and mono blocking them (one button to push) Far more detail, resolution, timber, depth and extension than the Bryston's. You can find a pair NEW for less than 4K. 400 WPC mono. Killer value.

Sean, check Stereophile's review of the 7B. They liked it enough to give it a Class A rating. I think they give a pretty good technical breakdown of the amp, it might answer a few of your questions.

I'll have to dig that one up and take a look at it. Thanks for reminding me about that review. While i do have a hard time "buying" some of their ratings, i can at least try to decipher the test results for myself. Sean
>