Home Theater and Two Channel With Out Reciever?


Would it be possible for me to substitue my home theater reciever for an amp, pre-amp, CD and DVD player setup? Ideally, I am looking for a system that performs well for music and is adequate for Home Theater. My thought would be to run my amps, cd and dvd player through a dedicated pre-amp and use the processor in my dvd player for Home Theater. Is this possible? If so, are there any draw backs that I should be aware of?

Use the following system for reference:

McCormack DNA-125 2 Channel Amp
McCormakc DNA-HT3 3 Channel Amp
Pre-Amp?
CD Player Music Hall CD-25
DVD Player Toshiba SD-9200
Speakers NHT - VT 2.9
Sub HSU VTF-3

I really have a hard time justifying the huge price for a dedicated processor. Classe, Bryston, Krell, Proceed, all equal big bucks. I also understand that it's possible to use my existing HT reciever as a pre-amp, but I don't want to take the chance of downgrading music performance.

Thanks in advance for any help.
dvincent55edbb
You could do what you are asking but you would have to pay a price that would cost $$$. Go to Bent audio web site and check out their passive hometheater set up, It is not the Transformer 102 that you hear a lot about. It is a set up for hometheater that would do what you want, I would only spend this kind of money for a multi-channel music system though as movies are not worth it price wise. If you just want to have top of the line two channel sound then all you need is a good two channel pre with a theater pass through for your main speakers and these are not hard to find (tube or SS) Or you could use a passive pre or any other good two channel pre with a little bit less flex.
If I use a pre with home theater pass, how will the components hook up? For instance, would the speakers, cd and dvd player hook up directly to the pre and then the pre to my television? and would it still be possible to listen to two channel television feeds through my main speakers?

I'm not sure of the routing. If anyone has a setup like this, please share your experience.

Thanks again
Lot's and lots of audiophiles(with 2 channel hi-end systems) do what you're asking about doing for HT purposes. The problem is that when you do the DD/DTS processing in the DVD player, and connect it(DVD player) to your 2 channel preamp through Analog connections, IT NEVER SOUNDS AS DYNAMIC! I've tried this time and time again. And no DVD player's analog outs(and internal DD/DTS processing, coupled either dirrectly to an amp, or through a preamp/amp combo, seems to pull this off well enough FOR TRUELY DYNAMIC DD/DTS PLAYBACK, as was intended by the mixers!
You would have better overall(especially dynamic)movie playback through your 2 channel system BY EVEN SIMPLY ADDING A RECEIVER AS A DIGITAL PRE/PRO FOR ACOUPLE HUNDRED BUCKS!..TRUST ME!(OR TRY FOR YOURSELF, AND YOU'LL KNOW) Even better, you can buy AN OUTBOARD DD/DTS PRE/PRO SUCH AS A MODEST ACURUS ACT 3, CLASSE SSP25, THULE, or similar, and have audiophile grade quality sonics for movies, and not spend a fortune.
Rember this however, if you do value the sonic capability that's avalable from DD/DTS, YOU NEED AN OUTBOARD DD/DTS PROCESSOR!...there's really no way around it for properly doing movies. Infact, I too use a high end 2 channel set-up with sub, but I loop in a digital pre/pro for movie chores. This is really the only way to do it right it seems.
I have just been through the same ordeal with similar equipment. My solution was to add an anolog pre with unity gain surround loop and use my HT receiver as pre/pro for movies and multi channel. Made a huge difference with 2-channel. From the equipment you have listed it appears that your receiver has main ins/pre outs for all channels. If your receiver has the processing features you want I would reccommend keeping it for now and getting a good preamp with the surround loop. As you stated good pre/pro's cost an arm and leg and still may not do 2-channel as well as a preamp that costs a fraction of the price. Additionally a 2-analog preamp will not be obsolete with the next generation of dolby, dts or whatever and you can just replace your receiver with another with the newer features.
Anyway, just my rationalization.