Are they truly balanced?

The only ones I am certain of are Aesthetix Callisto, BAT, Atmasphere, and Elliott EASE Magnum. There are probably others, but I will leave that to others who are positive as to which ones.

All ARC preamps with AES/EBU (XLR) connectors are balanced as are all Madrigal products. If nothing else, the AES/EBU connector puts the + and - part of the signal on identical pins. The RCA connector puts the + on the center pin and the - on the outer shell. This cannot be as good as it is asymetrical. Also, balanced cables have a male connector at one end and a female at the other so you don't have to "follow the arrows". When you hear the "click" as you plug in a balanced connector, you know you have a good contact. All in all, a much better way to hook up audio gear.

Thanks for your responses guys. My Joule Electra LA-100 MkIII is a very good sounding preamp to my ears. . .but it's single-ended. I really don't want to have to replace it simply to get balanced connectors.

Garfish, I've heard the same thing you have in the debate about which is better. I'm using 1 meter IC's, so it's not a matter of long cable runs. I guess I'll stick with what I have.

I'm currently doing A/B testing of the Electrocompaniet
EMC-1 and Sony 777es to determine which sounds better in my system. At this time, the Sony is winning. Since it doesn't have balanced outputs, the question would be moot. However, and this is where it could get tricky, I'm thinking of upgrading the EMC with the 24/192hz upgrade card. If this should prove to be the ticket for redbook, I'll be pondering the same question again.

I guess there's always something on the horizon to think about. Sometimes I wish I could simply relax and enjoy the music. Although, tweaking is what make the hobby so much fun (and expensive).

Kenl!
Please check my posting of 07-19-01 under Digital.
I made a short summery of a review of EMC-1 MkII,
and mentioned that the Dac of that player will
be sold separately,according to the review in
the Norwegian magazine Audio.
Regards
Håkan

i personally prefer balanced but i think it is way down the list of significance in system performance. execution of circut design is way more important than balanced verses single-ended. i like the symetry of the balanced concept and the noise rejection makes sense but i have not compared the 2 approaches enough to say there is a consistent difference in performance.

if you are happy with your current single-ended gear i wouldn't switch just for that design issue. if you were to re-think your whole system and go balanced that would be the time to do it.