OZfly, thanks for posting those addresses. They are very helpful.
"Power - what is most important."
"Power - what is most important." When trying to optimize audio and video by optimizig power mangement, what is the most import aspect to initially change(Also please supply some brand names):
1) Conditioning Power with balanced power piece of equipment at system panel. Perhaps Equitech Wall Cabinet System Panel
2) Use of 240 V setups like Richard Garys Substation
3) Using Richards Grays RGPC 400 MK II and RGPC 1200S
2) Using separate 20 or 30 Amps Socket Outlets - (??perhaps all coming out of a Equitech Wall Cabinet) for different aspects and areas of system
a) Amps - perhaps using TWO 20 or 30 Amps Outlets here
b) Digital Equipment using ONE Outlet
c) Analog Equipment - using ONE Outlet
d) ?? other
3) Changing wire used from system panel to site. Perhaps should change to 10 guage. All Home Runs. What brands are best? Should these wire runs be covered by metal tubes (or something else) to provide shielding from any type of interference (esp if ling ru.
4) Check all lines to make sure they are in phase.
5) Outlets/Sockets
a) Using Cryo'd or non cryo'd Outlets/sockets in Wall
b) Using Cryo'd or non cryo'd Outlets/sockets in Power conditioning devices like Furman Balance Equipment and/or Richard Gray
6) Changing Power Cords. Which cords should be used. What Guage Wire here
1) Conditioning Power with balanced power piece of equipment at system panel. Perhaps Equitech Wall Cabinet System Panel
2) Use of 240 V setups like Richard Garys Substation
3) Using Richards Grays RGPC 400 MK II and RGPC 1200S
2) Using separate 20 or 30 Amps Socket Outlets - (??perhaps all coming out of a Equitech Wall Cabinet) for different aspects and areas of system
a) Amps - perhaps using TWO 20 or 30 Amps Outlets here
b) Digital Equipment using ONE Outlet
c) Analog Equipment - using ONE Outlet
d) ?? other
3) Changing wire used from system panel to site. Perhaps should change to 10 guage. All Home Runs. What brands are best? Should these wire runs be covered by metal tubes (or something else) to provide shielding from any type of interference (esp if ling ru.
4) Check all lines to make sure they are in phase.
5) Outlets/Sockets
a) Using Cryo'd or non cryo'd Outlets/sockets in Wall
b) Using Cryo'd or non cryo'd Outlets/sockets in Power conditioning devices like Furman Balance Equipment and/or Richard Gray
6) Changing Power Cords. Which cords should be used. What Guage Wire here
- ...
- 10 posts total
- 10 posts total