usb dac for hi-end system


I will be integrating a new mac mini to my hi-end system what will be my 2 options?
- cost vs value
- cost no object?
emre
I don't mean to get into the USB / FireWIre debate, but what about Asynchronous USB?
Doesn't that clear the board of some of the USB issues?
At a substantially higher cost?
No. Better but still, no. USB is still a very poor interface. All pro recording studios use firewire - must be for a reason, no? (everything we try to reproduce onour rigs was doe with firewire, not usb). Just look at the technology and history of both. USB is for mice, keyboards, printers - not music. I won't say USB doesn't sound decent in some system, but far from what can be accomplished by computers or music servers from a firewire interface. All still needs to be implemented properly but we should not dismiss the inferiority of USB. I, for one, just can't believe how many mfg's are actually trying to make USB work, or, actually, sell it to us.
The difference between Firewire and USB:

FireWire vs. USB 2.0 - Architecture
FireWire, uses a "Peer-to-Peer" architecture in which the peripherals are intelligent and can negotiate bus conflicts to determine which device can best control a data transfer


Hi-Speed USB 2.0 uses a "Master-Slave" architecture in which the computer handles all arbitration functions and dictates data flow to, from and between the attached peripherals (adding additional system overhead and resulting in slower data flow control)

The Wavelength and Ayre DAC's overcome any short comings in USB.
And to add what to Jeff said, it doesn't make a difference if you use firewire or USB because all you are doing is sending bits from one place to another. The better implementations using either interface do not try to recover clocking from the input data stream. So, in this case if the sound is really different (vs imagined) and all other things being equal, the bits would have to be changed to account for the difference in sound. This is easy to prove right or wrong. Just copy files between a USB drive and something else with data integrity checks. How many times will the target data not match the source data?

And, most likely many "professional" studios/people use firewire because it was the interface of choice on MACs where just about all the "good" music software started and still exists. And it does have some advantages over USB, especially for multiple devices which not the setup most people use to take PCM from a disk drive and send it to a DAC.
I'm at a loss with your Scarlatti why you would not just use the matching dCS USB interface?

http://www.dcsltd.co.uk/product/scarlatti-upsampler

Surely this is matched and surely dCS would not release anything inferior? Thoughts?

I use the Paganini equivalent set up and as far as I can tell, with J River Media Center /Wasapi exclusive / ASUS EB1501 USB / Paganini USB interface, the sound is every bit as good as the Paganini transport via AES EBU. Adding room correction (Audiolense), it is clearly better than the transport.

I've not compared other DACs but have reports from two reviewers who have, that you the dCS gear is definitely in a different league to the cheaper DACs.

Look forward to hearing of your experiences.