bryston sp 7.1 or ead 8800 pro?????

that being said, my vote also would be EAD all the way. After enjoyin a Sim Audio Attraction for years (EAD digital board internals), I can heartily recommend EAD, and would move to their latest pice myself if I were to get back into HT...

Distortion:

I'm glad to see you got a hold of an 8800pro for some serious testing. I've avoided running my 2 channel path through any processor. Instead, I run the L and R front outputs from the processor into my 2 channel path. I'm not convinced that ANY processor is totally transparent in bypass mode.

I do use the multichannel bypass for my SACD/DVD-A path. I assume it is quite transparent, but have never a/b'd it to the SACD/DVD-a player outputs straight to amplification...so I can't really say.

Bottom line for me is that the EAD was superior to Bryston for 7.1 use...which is what I'm using it for. For other uses, experience may vary. I would be interested in you describing what you mean by "warmer" since it means different things to different people.

Also, I should point out that the Center Width and Panorama adjustments are going to be in the next software release for the 8800pro.

harry

Distortion,
Try using the 8 channel bypass as a linestage. I am using my Scout turntable with the 8800. I think the 2-channel anolog inputs on the 8800 convert to digital and back to anolog. I use my DVD players coax output for 2-channel digital so the dac's can be used in the 8800.

Tim

Sutts, thanks so much. Even though I am opinionated I try to be fair.

Flemke, I am using 2 of the eight analog inputs on the EAD for the two channel. (I really dont need to try the other 6 because my Jolida CDP resolves better than my Sony SACD). The manual isnt clear on whether it is A to D back to A on the other inputs. It is clear that the bypass inputs are analog only.

Harry, we have disagreed on this very topic before. In retrospect its easy to see why. My needs are different from yours (2 channel vs multi). Toss in different taste and systems it seems evident why you may like the EAD so much.

The bottom line is, this EAD is a really nice piece. Though I am satisfied with my current setup, especially considering the amount of 2 channel I listen to. There are a few things I like about each however. The setup is a snap with the EAD. The EADs face plate is gorgeous. The Bryston gives me the option of using a sub in two channel bypass, plus the Bryston lets me bypass any input, not a select few like the EAD.

Though this whole comparison is rather moot for me. I fully intend to separate HT from 2 channel or at least separate the signal. With that in mind I am even considering downgrading. I have a new house in the works and it will have an 18' by 22' bonus room (above the garage). I am thinking dedicated HT with projector. At the very least I will have a dedicated listening room.

Distortion.

I have my 2 channel path and my HT in the same room. Unless you want separate rooms, it is a breeze to isolate your 2 channel path so it never travels through a processor.....even through a bypass!!!

I also do primarily 2 channel listening, but I love it that my HT takes advantage of my 2 channel path.

Harry