2. home-theater
  3. 1121141300

Need Processor suggestions for 2 channel into 5

Current system: Spendor all around (S5e mains, C5e center, S3e surrounds, Sub 3); Audiolab 8000a integrated; Yamaha processor.

The speakers are A++ for the price, everything else needs upgraded...need suggestions

Several problems as I am only in the beggining stages:

1. I want to preserve 2 channel...leaning towards VAC Avatar amp due to the fact that it has an HT out, it's tube based and it's an integrated which I desire for this system.

2. Do processors amplify center and surrounds or will I need additional amps to run them. Or would one suggest a "receiver" based processor that I could amp the front mains only with the VAC (this is how the Yamaha works)?

3. Anyone with experience regarding sound quality for the center and surrounds in regard to question two...what are the pro's and cons...it seems silly to have a good speaker system that matches if they don't all sound close via the amp.

Thanks for your help.
chadlesko
kr4's avatar
kr4
3,672 posts
 
If you go with an integrated for the main/stereo setup, you can either get a pre/pro plus a 3channel power amp or an A/V receiver with pre-outs for the remaining functions and channels.

Kal
c123666
871 posts
 
Try an Audio Refinement Pre2DSP; excellent for 2 channel stereo and also a very good HT processor. Only a preamp, though, and you'll need a multi channel amp. A used Parasound HCA1206 for about 700 to 800 is hard to beat as it is a John Curl design, THX rated, makes 135wpc @ 8 ohms and 200 @ 4, 4 of the 6 channels can be bridged for stereo 350 watts, each channel has its own output control which is useful if powering an external passive woofer.
chadnliz
3,736 posts
 
First, yes yopu need an amp, Processors dont run your speakers, they run signals to an amp, I also would not look at a reciever, go with seperates
More to discover