Silver cables - Great price!!

Gallaine. I had completely overlooked the VCR as a source to run the cables from. My wife came home half an hour ago and wanted to know what in the "H" was wrong with our three month old stereo (I had the new cables hooked up to take a listen). Double thanks for an easy solution.

Gallaine, I would be really interested to learn your opinion on both the cables. I found Segui's great for my system, but when comparing high end cables it seems to be a real personal preference issue. I like Dekay's idea but somewhere I was told that you should burn them in on the components that you will be using. Perhaps this is just audiophile myth, I don't really know. Anyone have thoughts on this aspect?

Gallaine..I forgot one thing! You are using Sergui's ETS cables, and I have found these less than impressive. Too bright for my tastes, but a good price when compared to comparable cables. Remeber ETS means something like enter the silver, they are the least expensive of his cable. I started with them, but then I took a chance on his Fineline cross wrapped. Unfortunately the difference is HUGE and immediately noticable!!!!! I say unfortunately because I was hoping the difference would be negligable so I could keep using the inexpensive ones!!! I still have the original ETS's I bought but don't use them on the main system ( about $40,000 worth of stero toys!) Oh well I thought, just picked up ONE MORE expensive habit...just gotta work harder!!!! Enjoy! Steve

Galliane, Just checked home grown's site again. They use 22g wire, similar to the light star audio cables that used to be on audigon. This in my opion is way too big. Remeber the signal you are transmitting is tiny so they wire can be extremely small and still carry the signal. The thin wire does make a big difference, no or minimal skin effect. Think about it, If you used say 00g wire do you think it would better or worsen the sound quality? Considering electrons have mass they probable demonstrate similar properties to the rheological characteristics seen in complex fluid dynamics. This effect makes the bass and treble frequencies travel in different areas of the wire if it's too large. Very thin wires make it much more difficult to allow this to happen. If it sounds crazy, just give the finelines a try. If you are unhappy I'm sure Sergui would take them back and send you a couple ETS cables to replace them. Though if your like me you will probably have a new expensive habit to keep up with!Take care! Steve

Monroemed. Kevin @ Homegrown emailed this evening and Gallaine's method of breaking in cables is sound and will work fine. Kevin also noted that there should be a significant improvement in the sound at around the 50 hour mark. Since everything is kind of on auto pilot right now, I think that I will run them the full 200 hours or seven more days. I really know nothing about the fine points of (or more importantly what's even possible with) the new interconnects (I took fifteen years off from this hobby). This is only the third pair that I will have heard at home and one of those pairs is from RS. If they sound good with my Castle/MF gear I will post next week. If they don't I expect that it will be due to the lighter LF of my current system and will then try something copper or carbon within my budget, whatever that is, I seem to have lost track at this point. Mapleshades also look interesting and affordable, but the endorsements are a little too orgasmic to take seriously. I thank everyone for their help.